Systém monitorování polohy zrcadel detektoru Čerenkovova záření

Title Alternative:Mirror Position Monitoring System at Cherenkov Radiation Detector
dc.contributor.advisorŠulc, Miroslav
dc.contributor.authorJerje, Tomáš
dc.date2011
dc.date.accessioned2015-07-01
dc.date.available2015-07-01
dc.date.committed2010-12-10
dc.date.defense2011-02-07
dc.date.issued2010-01-01
dc.date.submitted2009-09-20
dc.degree.levelmgr
dc.descriptionkatedra: KFY;cs
dc.description.abstractThis diploma thesis deals with the computer simulation of a mirror position monitoring system at Cherenkov radiation detector. RICH-1 detector of the COMPASS experiment at CERN on the SPS accelerator is a radiation detector of Cherenkov device, using C4F10 gas as the active medium, which produces Cherenkov effect. The RICH-1 detector consists of two reflective spherical surfaces, composed of pentagonal and hexagonal mirrors located inside the detector with a total area of 21 square meters located in the detector. Furthermore, the detection surface of Cherenkov radiation. The aim of this thesis is to contribute to the correction of the position of Cherenkov rings disgruntling individual RICH-1 detector mirrors. Simulations were carried out in an optical computer software Zemax. In non-sequential mode different sources of radiation were tested. Then the most suitable one was selected and optimized. Putting the radiation sources together a grid was created. The grid represents a reflective grid, which is used in a real experiment. Further simulations were performed, followed by appropriate placement of hexagonal and pentagonal spherical mirrors in the system of coordination. Much of the work pays attention to optimizing the singlet (converging lens) and the optical system, herein represented by a lens that is in the RICH-1 detector used to capture images of the reflecting the grid on the mirror wall. The final part was the detector simulation and optimization of detector as a sensing chip. Full detector simulation with all the special features were very demanding on computer hardware. Database Zemaxu unfortunately has limited the type of light source, so they were made part of the detector simulation RICH-1.en
dc.description.abstractPráce se zabývá počítačovou simulací systému monitorování polohy zrcadel detektoru Čerenkovova záření. Detektor RICH-1, experimentu COMPASS v CERN, na urychlovači SPS, je detektor Čerenkovova záření, využívající plyn C4F10 jako aktivní médium, které vytváří Čerenkovův efekt. Detektor RICH-1 se skládá ze dvou odrazných sférických povrchů, složených z pětiúhelníkových a šestiúhelníkových zrcadel s celkovou plochou 21m2, umístěných uvnitř detektoru. Dále pak z detekční plochy Čerenkovova záření. Cílem práce je přispět ke korekci polohy Čerenkovských kroužků na rozladění jednotlivých zrcadel v detektoru RICH-1. Simulace byla provedena v počítačovém optickém softwaru Zemax. V nesekvenciálním módu byly testovány jednotlivé zdroje záření. Následně byl vybrán a optimalizován ten nejvhodnější. Složením zdrojů byla vytvořena mřížka, představující reflexní mřížku, která je použita v reálném experimentu. Dále byla provedena simulace a následné správné umístění jednotlivých šestiúhelníkových a pětiúhelníkových sférických zrcadel do souřadného systému. Velká část práce je věnována optimalizaci singletu (spojné čočky) a optické soustavě, která zde představuje objektiv, jenž je v detektoru RICH-1 použit ke snímání obrazu reflexní mřížky na zrcadlové stěně. Posledním prvkem byla simulace a optimalizace detektoru jako snímacího čipu. Simulace kompletního detektoru se všemi specifickými prvky byla velmi náročná na hardwarové vybavení počítače. Databáze Zemaxu bohužel disponuje omezeným typem světelných zdrojů, proto byly provedeny simulace částí detektoru RICH-1.cs
dc.formattext
dc.identifier.urihttps://dspace.tul.cz/handle/15240/11484
dc.language.isocs
dc.publisherTechnická Univerzita v Libercics
dc.subjectcherenkov radiationen
dc.subjectmirror position monitoring systemen
dc.subjectrich-1en
dc.subjectcernen
dc.subjectčerenkovovo zářenícs
dc.subjectsystém monitorování polohy zrcadelcs
dc.subjectrich-1cs
dc.subjectcerncs
dc.subject.verbispočítačová simulacecs
dc.titleSystém monitorování polohy zrcadel detektoru Čerenkovova zářenícs
dc.title.alternativeMirror Position Monitoring System at Cherenkov Radiation Detectoren
dc.typeThesisen
local.departmentKFYcs
local.facultyPřírodovědně-humanitní a pedagogická fakultacs
local.identifier.stag21747
local.identifier.verbis451683
local.note.administratorsoprava_A
local.verbis.aktualizace2019-10-05 05:55:35cs
local.verbis.studijniprogramKFY Učitelství pro střední školy/Učitelství fyziky matematikycs
Files
Original bundle
Now showing 1 - 4 of 4
Loading...
Thumbnail Image
Name:
mgr_21747.pdf
Size:
2.11 MB
Format:
Adobe Portable Document Format
Description:
kvalifikační práce
Loading...
Thumbnail Image
Name:
opo_21747.pdf
Size:
550.28 KB
Format:
Adobe Portable Document Format
Description:
posudek oponenta
Loading...
Thumbnail Image
Name:
ved_21747.pdf
Size:
591.33 KB
Format:
Adobe Portable Document Format
Description:
posudek vedoucího
Loading...
Thumbnail Image
Name:
obh_21747.pdf
Size:
430.16 KB
Format:
Adobe Portable Document Format
Description:
výsledek obhajoby