Browse
Recent Submissions
Now showing 1 - 5 of 10
- ItemIMAGE-BASED CROSS-SECTIONAL ANALYSIS AND MICROMECHANICAL MODELING OF YARN AND COMPOSITE MATERIALS(Technical University of Liberec, ) Overberg, Matthias; Zalewska, Emilia; Abdkader, Anwar; Cherif, Chokri; Technická univerzita v LiberciThis study aims to establish a comprehensive methodology for determining the microstructural properties of hybrid yarns used in composite materials. By developing accurate models of hybrid yarns and composites based on detailed microstructural information such as fibre orientation, fibre diameter and distribution, this approach lays the foundation for future advances. These models, enriched with accurate microstructural data, will facilitate the creation of new modelling techniques that can be used in future research to explore the correlation between microstructural properties and mechanical performance of composite materials.
- ItemSPECTROKINETIC INVESTIGATION OF THE PHOTOCHROMIC SYSTEM UNDER CONTINUOUS UV IRRADIANCE USING REFLECTANCE VS. TIME CURVES(Technical University of Liberec, ) Solanki, Utkarshsinh B.; Viková, Martina; Vik, Michal; Technická univerzita v LiberciThe photochromic properties of the dye 5-chloro-1,3,3-trimethylspiro[indoline-2,3'-[3H] naphtho[2,1-b] [1,4]- oxazine] were investigated by exposing it to continuous monochromatic irradiation using 360 nm ultraviolet irradiation using photochromic prints at 293.15 2 K; it undergoes a photocoloration and photodecoloration state, thus following the dynamics of a photochromic cycle of growth and decay phase, respectively. Even if the isolated photo isomeric form of the photochromic dye structure is unavailable, one can quantitatively analyse the photo-induced kinetics of photochromic systems using the raw reflectance data. The quantum colour yield is represented by colour span values [K/S] obtained by converting reflectance data to Kubelka- Munk values. The dynamics of the photoreaction in a photochromic system can be examined by analysing the constants for the rate of colouration and decolouration caused by light. By employing first-order kinetics, the dependent dominant wavelength [max] can be determined by fitting the raw data obtained as a change in reflectance values from the FOTOCHROM3 spectrophotometer. The relationship between the colour span values and the concentration of the photochromic dye employed in the photochromic prints is linear.
- ItemANTIVIRAL TEXTILES AND ANTIVIRAL ACTIVITY TESTING - THE USE OF BACTERIOPHAGE SURROGATE FOR ANTIVIRAL ACTIVITY TESTING(Technical University of Liberec, ) Tvrzová, Ludmila; Bláhová, Anna; Fojt, Jakub; Doubková, Hana; Procházka, Jiří; Technická univerzita v LiberciThe risk of dissemination of highly contagious viral diseases (as COVID-19, Ebola) led in the increasing need to develop functional textiles and surfaces with antiviral effect. Antiviral textiles are designed to reduce the viability and infectivity of viruses on their surfaces and by this way to reduce the cases of infection (including re-infection or cross-infection with contaminated textiles). Different antiviral agents and diverse techniques of their application are used for functionalized textiles manufacturing. The most often used antivirals are metallic and ionic silver and copper, iron oxide, quaternary ammonium salts. The aim of the process is to prepare textiles with long-term durable finishing effective in viral activity inhibition. The basic step of functionalized antiviral textiles development is antiviral effectivity testing. The safe method of testing with the use of Phi6 bacteriophage, SARS-CoV-2 and Ebola virus surrogate, was modified for antiviral textiles testing. The samples of textiles with antiviral finishing were tested by the bacteriophage-based method and excellent antiviral activity was detected for all tested materials. The woven cotton was used as reference untreated material, the different textile cotton structures with similar square weight were compared and no statistically significant difference was found between the resulting antiviral efficacy values. A simple and quickly feasible screening method for determining the antiviral properties of textiles, especially with leaching-type of treatment, was also designed and tested.
- ItemDATA ANALYSIS FOR THE PREDICTION OF TEXTILEWASTE RECYCLING IN UKRAINE(Technical University of Liberec, ) Bukhantsova, Liudmyla; Zacharkevich, Oksana; Luschevska, Olena; Krasniuk, Larysa; Koshevko, Yulia; Ditkovska, Olesya; Shvets, Galina; Technická univerzita v LiberciThe textile and sewing industry is known to be the second most environmentally harmful industry for the environment. To maintain a circular economy, textile sources should be recycled, repaired, and used as much as possible while retaining their value. This research provides primary information about the database of post-production textile waste. The data suggests that 30 garment companies produce 778.11 tons of postproduction textile waste per year, with cotton accounting for 42.14% and polyester for 32.45%. It is important to consider processing waste using different technologies according to the certification of textile waste to determine its raw material composition and purity. For an effective waste management policy, it is essential to implement it systematically, continually assess outcomes and challenges, and involve all stakeholders and activities that generate and manage waste. This is crucial in formulating an effective waste management policy.
- ItemGARMENT DURABILITY ANALYSIS – INFLUENCE OF TEXTILE MAINTENANCE(Technical University of Liberec, ) Wiener, Jakub; Šubrová, Tereza; Coetzee, Divan; Technická univerzita v LiberciTextiles used in clothing pose a large environmental burden from their initial manufacturing, maintenance and end of life. Garment production is a major problem whose environmental impacts can be easily quantified since it is a defined production process. To implement sustainable processes, it is necessary to evaluate the entire life cycle of a garment, including its maintenance and end-of-life. In this study, the maintenance phase of the garment is investigated. The garment maintenance is divided into real applied steps, and these individual steps are analysed in terms of raw material especially regarding potential/real damage to the treated garment fabric. The different maintenance steps are contextualised by the survey and results of the questionnaire used for the study. This investigated which gentle maintenance practices the respondents use in practice. The source of the analysed data is a questionnaire survey made in the Czech Republic. The result is a thorough analysis of the maintenance practices associated with garments and an analysis of ways to extend the lifetime of garments and thus reduce their environmental burden caused by excessive waste generation.