Rok 2022

Permanent URI for this community

https://dspace.tul.cz/handle/15240/163502

Browse

Now showing 1 - 20 of 33

APPLICATION OF JBATIK TECHNOLOGY IN THE DEVELOPMENT OF MOTIF DESIGN FOR TRADITIONAL BATIK CRAFTSMEN
(Technical University of Liberec, ) Ciptandi, Fajar; Rosandini, Morinta; Lukman, Muhamad; Technická univerzita v Liberci
This participatory action study is aimed at identifying the adaptation level of traditional batik craftsmen in developing batik motif designs using jBatik software technology. The research participants consist of 10 traditional batik craftsmen, three from the innovators group and seven from the adopters group located in Kerek District, Tuban Regency, East Java Province, Indonesia. The application of jBatik technology will be carried out using the Diffusion of Innovation theory which divides the process stages into 5, namely the knowledge stage, persuasion stage, decision stage, implementation stage, and confirmation stage. The results of the theory application resulted in 4 things. First the knowledge about various social system variables and the characteristics of the innovation recipients. Second, the design of the communication model to include knowledge about the innovation of batik motif design as a result of the JBatik software. Third, the results of the simulation of the application of batik motif designs produced by the jBatik software with craftsmen. Fourth, validation of the simulation results of the application of batik motif design innovations by craftsmen by people who had the ability to measure the level of absorption of innovation, so that the level of adaptation of traditional craftsmen to the technological challenges of the jbatik device could be identified. This study contributes to determining the level of knowledge and basic skills possessed by traditional batik craftsmen to serve as a starting point in deciding innovation strategies to be solutions that can be implemented by them.
COLOR PERCEPTION ESTIMATIONS OF METAMERIC PAIRS UNDER DIFFERENT ILLUMINANCE LEVELS
(Technical University of Liberec, ) Mukthy, Azmary Akter; Vik, Michal; Viková, Martina; Technická univerzita v Liberci
LEDs or light emitting diodes of the lighting class dominate both the indoor and outdoor lighting industries today due to their accuracy and consumer-friendly color temperature. In the context of color science, it is necessary to analyze both the spectral power distribution of lighting and the human characteristics of color perception under these lights. In this article, we provide estimates of the appearance of eleven metameric pairs under LEDs with four correlated color temperatures and six illuminance levels, using color difference formulas based on the CIELAB, CAM02-UCS, and CAM16-UCS models to verify our estimates. We followed ASTM D4086 standard visual methods for detecting metamerism and for estimating the magnitude of a metameric color difference. Our investigations found that color appearance models are more reliable than CIELAB in evaluating color difference under various LED conditions. CAM16-UCS more accurately predicted the color difference estimates between all three formulas. Our comparative study confirms that the variation in the estimates with the CCT and illuminance levels of the LED sources depends on the color appearance model used. The results also showed that in order to determine the color difference of metameric pairs, optimal conditions regarding the colorimetric properties of the samples and the variability of the observer should be considered separately. We noticed an increasing correlation trend with increasing illuminance. However, there was no such increase or decrease trend in CCTs. The trend of the STRESS change in the color appearance models showed the influence of the chromatic adaptation, but the establishment of adaptation patterns is far beyond the scope of this work. Although our research has had limitations on correlated color temperature and illuminance, we believe that it can be beneficial for the lighting application to ensure correct lighting decisions when assessing the color differences of metameric pairs.
COMPARISON OF QUANTITATIVE METHODS FOR DETERMINING THE ANTIBACTERIAL EFFECTIVENESS OF NON-WOVEN TEXTILES
(Technical University of Liberec, ) ŠČASNÍKOVÁ, KATARÍNA; SIBILOVÁ, ANDREA; BÁNOVSKÁ, ZUZANA; Technická univerzita v Liberci
This contribution is aimed at comparing two quantitative methods for determining the antibacterial effectiveness of non-woven textiles and assessment of permanence of the antimicrobial finish of the nonwoven textile materials prepared from polypropylene fibers. Experience and results obtained by the quantitative test methods specified in AATCC TM 100 and STN EN ISO 20743 intended to evaluate the effectiveness of the antibacterial finish are published in the contribution. Emphasis is placed on comparability of the selected test methods, on the test microorganism used in the study as well as on evaluation of the results of antibacterial effectiveness. The non-woven fabrics, that were the subject of the evaluation, were pre-treated by surface activation with low-temperature plasma at atmospheric pressure and subsequently finished using antimicrobial (AMB) nanosol solution with a concentration of 15 ppm Ag+, 30 ppm Ag+, 60 ppm Ag+ and 120 ppm Ag+. Antibacterial effectiveness before washing and after 5 washing cycles is demonstrated on the specific examples obtained from practice.
DESIGNING OF HEALTH-SAVING MEN’S GLOVES
(Technical University of Liberec, ) BUKHANTSOVA, LIUDMYLA; LUSCHEVSKA, OLENA; YANTSALOVSKYI, OLEKSANDR; KRASNIUK, LARYS; TROYAN, OLEKSANDR; KULESHOVA, SVETLANA; DITKOVSKA, OLESYA; Technická univerzita v Liberci
Living during a COVID-19 pandemic has negative effects on a person's psychophysiological state such as high-stress levels, leading to poor health, chronic fatigue and insomnia. As a result, the immunity is reduced, which is particularly dangerous today. One way to solve this problem is the use of health-saving clothing, which has additional features that provide the positive effect on the wearer’s body. The developed gloves affect the state of the human autonomic nervous system through biological-active locations in the places of the hand and wrist. An anthropometric study of the biological-active locations of the wrist and hand is performed to construct the glove design. An algorithm for constructing a drawing of the design of the designed product based on four measurements is proposed. The effectiveness of the adaptive gloves is confirmed by studying its effect on the psycho-emotional and psychophysiological state of a person without exposure to the product and after its use by software "Intera-Diacor" and "ROFES", and a questionnaire. The evaluation is performed after wearing gloves for 20-40 minutes. It was found that 83.3 % of the wearers of the health-saving gloves showed positive changes in the body's compensatory forces (stress) and the state of internal emotional fatigue. Thus, the use of health-saving gloves has a positive social, therapeutic (health-saving) and economic effect, as the product has several functions It is an accessory fashion, has hand protection, and, has additional features to positively influence the body of the person wearing it. This allows the future to talk about the use of consumer-friendly and effective ways to correct the men's psychoemotional and psychophysiological states, based on the safer-by-design concept.
DETERMINATION OF TENSION FOR ARAMID AND CARBON YARNS WHILE WEAVING INDUSTRIAL FABRICS
(Technical University of Liberec, ) Shcherban, Volodymyr; Kolysko, Oksana; Melnyk, Gennadiy; Kolysko, Marijna; Shcherban, Yuriiy; Shchutska, Ganna; Technická univerzita v Liberci
Resulting from researches conducted to determine tension for para-aramid, meta-aramid, and carbon multifilament yarns during their contact with the operative parts of the weaving looms as part of the industrial fabrics formation process, we have found out that in threading areas the tension is increasing driven by variation of values of the friction forces in the contact area. It has been proven that tension degree of para-aramid, meta-aramid, and carbon multifilament yarns before industrial fabric formation area is influenced by (1) tension before cylindrical guide surface of an operative part, (2) radius of the cylindrical guide surface curve of the operative part, (3) contact angle between yarns and cylindrical guide surface of an operative part, (4) mechanical, physical and structural properties of para-aramid, metaaramid, and carbon multifilament yarns. It allowed (yet at the initial stage of design of technological process of industrial fabric formation) to determine para-aramid, meta-aramid, and carbon multifilament yarns tension before formation area depending on (1) form of threading line for yarns at the weaving loom, (2) mechanical, physical and structural properties of para-aramid, meta-aramid, and carbon multifilament yarns and industrial fabrics. The paper contains experimental research of interaction of para-aramid, metaaramid, and carbon multifilament yarns and cylindrical guide surfaces of the operative parts of automatic weaving looms. Based on experimental researches regression dependencies have been obtained between para-aramid, meta-aramid, and carbon multifilament yarns tension value after cylindrical guide surfaces of the operative part and (1) tension before cylindrical guide surface of the operative part, (2) radius of the cylindrical guide surface curve of the operative part, (3) contact angle between yarns and cylindrical guide surface of the operative part. Consecutive application of these regression dependencies allows to determine para-aramid, meta-aramid, and carbon multifilament yarns tension before industrial fabrics formation area. Analysis of regression dependencies allowed to find out values of technological parameters when para-aramid, meta-aramid, and carbon multifilament yarns tension before industrial fabrics formation area will be of minimum value. It will allow to minimize tension of para-aramid, metaaramid, and carbon multifilament yarns while manufacturing resulting in (1) yarn breakages reduction, (2) better productivity of weaving looms due to reduced stoppage time, (3) improved quality of manufactured industrial fabrics. Therefore, we can argue that suggested technological solutions are practically attractive. In view of this, it is reasonable to say that it is possible to directionally regulate the process of para-aramid, meta-aramid, and carbon multifilament yarns tension change while manufacturing industrial fabrics on the weaving looms through selection of values of guides’ geometrical parameters.
DEVELOPMENT OF A METHOD TO DIGITIZE CLOTHING PATTERNS
(Technical University of Liberec, ) ZAKHARKEVICH, OKSANA; KOSHEVKO, JULIA; SKYBA, MYKOLA; DITKOVSKA, OLESYA; SELEZNEVA, ANNA; LUSCHEVSKA, OLENA; Technická univerzita v Liberci
The study aims to develop a method to digitize a clothing pattern without a digitizer. For this study, we address the following objectives: formulate a hypothesis of the method, describe the method’s algorithm, and perform testing and evaluation of the developed method. The idea of the developed method is as follows: digitizing the clothing patterns might be achieved without digitizer by applying modification tools of the pattern design systems to the digital simple geometrical forms constructed directly in the graphical environment of the system. Testing and evaluation of the developed method confirmed the initial hypothesis. The achieved result of the current study is the alternative method to digitize clothing patterns when it is necessary to avoid additional costs.
EFFECT OF DIFFERENT CRIMP METHOD OF JUTE FIBRE ON STRENGTH AND ELONGATION PROPERTIES OF JUTE YARN AND WOVEN FABRIC
(Technical University of Liberec, ) AKTER, SHILPI; MOTALAB, MOHAMMAD ABDUL; HELALI, MAKSUD; Technická univerzita v Liberci
Yarn and fabric strength is one of the most important parameters to predict the uses of the end product. Fabric strength mostly depends on yarn strength and yarn strength is prejudiced by fibre strength or fibre properties. Crimp is one of the essential parameter that influences the fibre properties. In this research, crimp box and gear crimp methods were used to introduce crimp into jute fibre. It was found that crimps were irregular in size, shape and number produced from crimp box method. On the other hand, crimps produced from gear crimp method were comparatively regular in size, shape and number. Yarn and fabric strength tests were carried out according to testing standard. It was revealed that yarn strength and elongation at break of gear crimp method were higher than that of crimp box method. Apart from this, fabric strength and elongation were also improved for a regular and increased number of crimps for gear crimp method.
EFFECT OF MECHANICAL CRIMP OF JUTE FIBRE ON THE THERMAL PROPERTIES OF WOVEN FABRICS
(Technical University of Liberec, ) Akter, Shilpi; Motalab, Mohammad Abdul; Helali, Maksud; Technická univerzita v Liberci
The aim of this paper is to find the effect of mechanical crimp of jute fibre on the thermal properties of woven jute fabrics. In this study, crimp box and gear crimping method were used to impart mechanical crimp into jute sliver. Crimps were divulged to enhance the cohesion between fibres that make it suitable for spinning. Jute yarns were produced by inserting a different number of crimps and woven fabrics were produced by using these yarns. Fabric thickness, porosity, air permeability and thermal conductivity tests were done according to standard method and found that fabric porosity, air permeability and thermal conductivity of the fabric decreased and fabric thickness increased with the increased number of crimps and fabrics from gear crimping method showed better effect than that of crimp box method. The study on jute woven fabric will provide quantitative experimental data for potential applications with advantages of lightweight, cost-effective, easy to manufacture, biodegradable and excellent mechanical properties.
EVALUATION OF THE COMPATIBILITY OF POLYORGANYLSILOXANES AND HIGH-MOLECULAR POLYMERS USED AS EMULSIFIERS IN FINISHING WORKS
(Technical University of Liberec, ) HOROKHOV, IHOR; KULISH, IRINA; ASAULYUK, TATYANA; SARIBYEKOVA, YULIA; SEMESHKO, OLGA; MYASNYKOV, SERGEY; Technická univerzita v Liberci
The compatibility of polyorganylsiloxanes and high-molecular polymers used as emulsifiers was evaluated. The surface and bulk properties of the studied compounds were evaluated using the solubility parameters (δ). It is shown that the copolymers of acrylic acid compound – polyacrylamide and hydrolyzed polyacrylamide, as well as polyvinyl alcohol without residual acetate groups in the macromolecule have the highest degree of incompatibility with polyorganylsiloxanes. It was established that the presence of residual acetate groups in the macromolecule of polyvinyl alcohol leads to an increase in the degree of compatibility of polymers. The calculated data on the fractions of solubility parameters and cohesive energy of polyorganylsiloxanes and emulsifying polymers are presented. The contributions of the components of polymers cohesive energy due to the fractions of dispersion interaction αd, dipole-dipole interaction αdd, and hydrogen bonding αh, as well as their influence on the degree of solubility of the polymer – emulsifier system, are shown. The choice of polyvinyl alcohol with residual acetate groups as an emulsifier for polyorganylsiloxanes is theoretically substantiated based on the concept of the solubility parameter as a measure of the affinity of the system components. The developed approach to assessing the compatibility of the polymer – emulsifier system is of practical importance for the creation of polymer compositions in the finishing works.
Evidence tisku Vlákna a textil
(2022-04-06) Tunáková, Veronika
FASTNESS PROPERTIES IMPROVEMENT OF FLUORESCENT PIGMENTS
(Technical University of Liberec, ) Islam, Md. Khayrul; Mamun Kabir, Shekh Md.; Hosen, Md. Dulal; Islam, Md. Azharul; Technická univerzita v Liberci
The resistance of the material to a change of its color characteristics during exposure to sunlight, rubbing and washing as domestic and laundry and other various ways are referred to as color fastness of dyes or pigments. In this research, 100% cotton and blended fabrics were dyed with fluorescent pigments i.e. Shining Flu Pink-F17 and Papillion Orange-FGRN in exhaust dyeing method. The improvement of color fastness properties, i.e. color fastness to washing, rubbing, perspiration and light were observed with the treatment of using antioxidants and UV-absorbers. There were eight samples of dyed fabrics (Four samples of 100% cotton knit fabric and four samples of 60/40 cottonpolyester blended fabrics) treated with 1% (v/v) of antioxidants i.e. Gallic acid, L-Ascorbic acid and UV absorbers i.e. 2-hydroxy-4 methoxy-benzophenone, 4-4 dimethoxy-benzophenone respectively. The treatment of antioxidant L-Ascorbic acid and UV absorber 4-4 dimethoxy-benzophenone provides satisfactory improvement of fastness properties than other antioxidants and UV absorbers. The results were mainly interpreted in terms of color strength, visual assessment of evenness and fastness ratings.
FEATURES OF THE PRIMARY PREPARATION OF HEMP STRAW STALKS SUITABLE FOR OBTAINING CELLULOSECONTAINING MATERIALS AND PAPER
(Technical University of Liberec, ) Putintseva, Svitlana; Tikhosova, Anastasiia; Krahlyk, Vira; Kapitonov, Artem; Technická univerzita v Liberci
The features of the primary preparation of hemp straw stalks suitable for obtaining cellulosecontaining materials and paper are considered in the article. The primary processes of the preparation of hemp raw materials for pulp production, which include harvesting, storage of straw stalks, transportation, and primary processing of raw materials suitable for obtaining cellulose-containing materials, are described. Methods of shortening stems and fibers applied in the pulping process are studied in detail. Technological methods of shortening straw stalks of technical hemp and cleaning raw materials from grains and garbage impurities are mentioned. The necessity of applying the processes of stalks crushing and wet purification of chopped straw stalks of technical hemp is proved.
FRAME MODEL OF UNIAXIAL STRETCHING OF 1x1 RIB KNITS
(Technical University of Liberec, ) Yelina, Tetiana; Halavska, Liudmyla; Bobrova, Svitlana; Shcherban, Volodymyr; Dzykovych, Tetiana; Technická univerzita v Liberci
One of the nowadays challenges is the development of scientific sound models of knitwear deformations. The paper is devoted to developing an algorithm for constructing a frame model of rib 1x1 knits stretched in the course or wale direction. In the process of uniaxial stretching, the shape of the sample depends on the tensile forces orientation. A frame model of a deformed knitted structure, and an algorithm of construction of a mesh frame, are developed during the study. The frame model makes it possible to find coordinates of intermeshing points of every stitch. Then yarn characteristic points can be determined that, in turn, serve as input data for the construction of 3D model of rib 1x1 structure under uniaxial tensile deformations at the yarn level of detail. The study provides a graphical tool for formalization of geometric transformation that happen during 2D deformations of knitted structures, characterized by gradual change of the specimens width crosswise to the loading direction. This model is intended to become a part of a general deformation model of knitted fabrics.
INFLUENCE OF ANTISTATIC POLYESTER FIBERS ON THE PROPERTIES OF COTTON AND POLYESTER SINGLE JERSEY KNITTED FABRICS
(Technical University of Liberec, ) Asfand, Norina; Basra, Sikander Abbas; Daukantienė, Virginija; Jamshaid, Hafsa; Ali, Zulfiqar; Technická univerzita v Liberci
In this research, the influence of the antistatic polyester fibers containing carbon black on the comfort properties of 100% and blended cotton as well as on 100% and blended polyester single jersey knitted fabrics was evaluated. The research results revealed that the behavior of the investigated knitted fabrics was dependent on their structure and mechanical characteristics. The electrical resistance of knitted fabrics decreased significantly due to the use of 4% antistatic polyester fibers. The electrical resistance of the pure and blended cotton knitted fabric was lower than that of the pure and blended polyester knitted fabrics. Antistatic polyester fibers positively influenced the air permeability of the polyester knitted fabric. The air permeability of 100% and blended cotton fabrics was approximately 3.5 times compared to both 100% and blended polyester fabrics, respectively. The carbon black polyester fibers influenced the decrease in thermal resistance, the increase in vapor permeability, and the minor increase in vapor resistance of both cotton and polyester knitted fabrics. Thermal resistance was lower, water vapor resistance was significantly higher, and relative water vapor permeability was slightly lower for the cotton and cotton/antistatic polyester knitted fabrics than for the polyester and polyester / antistatic polyester knitted fabrics, respectively. Therefore, the research results revealed that the presence of 4% antistatic polyester fibers in cotton and polyester knitted fabrics positively influenced their antistatic behavior and improved or almost did not alter their comfort properties.
THE INFLUENCE OF CONSTRUCTION OF NON-WOVEN TEXTILES ON AIR PERMEABILITY FOR THEIR APPLICATION IN THE COMMUNITY FACE MASKS
(Technical University of Liberec, ) BALOGOVÁ, ĽUDMILA; HULJAKOVÁ, KAMILA; Technická univerzita v Liberci
The article is aimed at evaluating the air permeability of various types of non-woven fabrics prepared by Spunbond, Spunbond-Meltblown-Spunbond technology and non-woven fabrics reinforced mechanically by needling and thermal calendering. These are commercially available non-woven fabrics with various mass per unit area and thickness made of 100 % polypropylene, without special surface finish. By combining individual types of non-woven fabrics, three-layer and four-layer textile materials were prepared, meeting the minimum requirement of technical standardization information TNI CWA 17553 for air permeability, intended for application in the community face masks. As part of the experimental works, the effect of increased humidity on the air permeability of three-layer non-woven fabrics was verified as well.
THE INFLUENCE OF CORE - SHELL RATIO ON CHARACTERISTICS OF MICROCAPSULES CONTAINING CINNAMON ESSENTIAL OIL APPLIED TO AROMATHERAPEUTIC TEXTILES
(Technical University of Liberec, ) Huong, Chu Dieu; Thi Chinh Thuy, Dao; Thi Tu Trinh, Nguyen; Technická univerzita v Liberci
Microencapsulation is one of the techniques to prepare the functional textiles. In this paper the essential cinnamon oil loaded microcapsules were prepared by solvent evaporation method. In the microencapsulation process, the core - shell ratio was changed by altering the cinnamon oil content in four levels of 0.15, 0.25, 0.35 and 0.45 g while the other components remained unchanged. The microcapsule characteristics including shape and morphology, size and size distribution, microencapsulation efficiency in dependence on the core-shell ratio were investigated. The antimicrobial capacity and the fragrance durability of interlock knitted fabric coated with the elaborated microcapsules were evaluated. The results showed that cinnamon oil was microencapsulated successfully in the spherical microcapsules. When the cinnamon oil content increased, the microcapsule size decreased and the size distribution became broader, the microcapsules were more porous and more aggregate, the fragrance intensity of the fabric treated with microcapsules increased while the activity against E. coli bacteria decreased. According to the results, the microcapsules elaborated with 0.15 g of cinnamon oil was recommended for the treatment of interlock cotton knitted fabric to apply in aroma and antimicrobial textiles.
INFLUENCE OF MICROENCAPSULATION PARAMETERS ON THE SIZE AND MORPHOLOGY OF MICROCAPSULES BY ECO-FRIENDLY SOLVENT EVAPORATION METHOD ORIENTED TO MEDICAL TEXTILES
(Technical University of Liberec, ) THUY DAO THI CHINH; SINTES-ZYDOWICZ NATHALIE; HUONG CHU DIEU; Technická univerzita v Liberci
Application of microcapsules in medical textile has been studied and commercially developed widely in recent years. The aim of this work was to propose an eco-friendly microencapsulation by solvent evaporation method that can contribute to the manufacture of medical textile products using microcapsules. Quillaja saponin was used as bio-sourced surfactant and ethyl acetate was used as the less toxic, non-halogenated organic solvent. The influences of saponin concentration, stirring speed during emulsification step and the volume of ethyl acetate used to saturate the aqueous phase before emulsification on the microcapsule size and morphology were investigated. The results showed that eudragit microcapsules of ibuprofen with diameter in range from 17 to 34 µm, which were suitable for medical textile applications, were successfully elaborated. The saponin concentration varied from 0.025 to 0.1 wt%. The stirring speed was changed from 700 to 600 rpm. The volume of ethyl acetate used in saturation step was 0, 8 and 12 ml. In the scope of investigation, the saponin concentration and the volume of ethyl acetate used in saturation step did affect the microcapsule size and morphology while the stirring speed did not. The saturation step really helped to reduce the formation of irregular microparticles and to narrow the size distribution, but the microcapsules became more porous, weaker and were deformed significantly by drying in the fabric treatment process.
INFLUENCE OF SOME WINDING PARAMETERS ON HAIRINESS OF YARN AFTER WINDING PROCESS
(Technical University of Liberec, ) TRAN DUC TRUNG; CHU DIEU HUONG; DAO ANH TUAN; Technická univerzita v Liberci
Hairiness is an important quality parameter of yarn after winding process. It affects not only the quality of yarn, but also the productivity of the warping, weaving, knitting machines as well as the quality of produced fabrics. Hairiness is influenced by the factors of raw materials, technology and equipment at all stages of yarn production. This article presents the results of experimental research on the simultaneous influence of four typical winding parameters, including: Winding speed (Z1), the load on the friction discs of the yarn tensioner (Z2), the distance between the bobbin and the yarn guide (Z3) and the pressure of package on the grooved drum (Z4) to the increasing percentage of the hairiness of the yarns after winding compared to that before winding. Yarn hairiness was measured by Uster tester 5. By using the second-order orthogonal experimental planning, together with the support of Excel 2019 and Design Expert 11 software, an experimental matrix and mathematical models describing the relationship between the four winding parameters and increasing percentage of the hairiness of three types of yarn (carded Ne 31/1 CVCD, combed Ne 30/1 CVCM, combed Ne 30/1 COCM) are established. The research result is the scientific basis for selecting the optimal winding parameters in order to achieve the required increase in hairiness of the yarn after winding or predict hairiness increase of the yarns before winding.
INVESTIGATION OF ANTIMICROBIAL PROPERTIES OF TEXTILE MATERIALS AFTER WASHING
(Technical University of Liberec, ) Martirosyan, Irina; Pakholiuk, Olena; Golodyuk, Galyna; Lutskova, Viktoria; Lubenets, Vira; Technická univerzita v Liberci
This work is devoted to the study of antimicrobial properties of cellulose-containing textile materials treated with new safe biocidal products of thiosulfonate structure. A resource-saving method of providing antimicrobial properties to cellulose-containing textile materials is presented. High antimicrobial activity of biocidal products after washing was established. The duration of action and expediency of their use in the textile industry are proved. It is shown that after 10 washes the treated tissues lose only 14-15% of antimicrobial properties.
Oznámení k evidenci a přidělení evidenčního čísla periodickému tisku
(2022-11-09) Tunáková, Veronika

Browse

Browsing Rok 2022 by Title

Results Per Page

Sort Options