Inovace leštičky asférických čoček

Simple item page
dc.contributorTomka David, Ing.
dc.contributor.advisorLindr David, Ing. Ph.D.
dc.contributor.authorPrikhodko, Igor
dc.contributor.otherSkolitel : 55316 Simová Jozefína, doc. Ing. Ph.D.
dc.contributor.otherKonzultant : 61635 Šafka Jiří, Ing. Ph.D.
dc.contributor.otherKonzultant2 : 64612 Golodnykh Gennadiy, Ing. Ph.D.
dc.date2015
dc.date.accessioned2018-05-03
dc.date.available2018-05-03
dc.date.committed2015-05-15
dc.date.defense2015-06-16
dc.date.issued2014-10-31
dc.date.submitted2014-10-31
dc.date.updated24.6.2016 17:13
dc.degree.levelIng.
dc.description.abstractThe main project goal was to develop a software and hardware configuration for testing stand, which will be simulate work of three axis aspherical lenses polishing machine.Whole work was divided into four steps. The first step was to learn the information about the topic in the field of spherical lenses and polishing machine theory. The second step was to obtain the relationship between coordinates of the desired point and angles of eccentric's rotation. In the step three, was written script for the simulation and visualization results, obtained in step two. As step four was created test stand and corresponded software for it.cs
dc.description.abstractThe main project goal was to develop a software and hardware configuration for testing stand, which will be simulate work of three axis aspherical lenses polishing machine.Whole work was divided into four steps. The first step was to learn the information about the topic in the field of spherical lenses and polishing machine theory. The second step was to obtain the relationship between coordinates of the desired point and angles of eccentric's rotation. In the step three, was written script for the simulation and visualization results, obtained in step two. As step four was created test stand and corresponded software for it.en
dc.description.mark
dc.format56 p, (48 000 characters)
dc.format.extentIlustrace, Tabulky Výkres sestavy, ROM, Schémata, Grafy, Tabulky, Plany 1 x , 1 x výkres ROM
dc.identifier.urihttps://dspace.tul.cz/handle/15240/25043
dc.language.isoan
dc.relation.isbasedonbegin*arab* renewcommand*labelenumi**[arabic*enumi*]* item Craig J.,J.: Introduction to Robotics Mechanics and Control, Third Edition, Prentice Hall, 2005. item JOHN, Karl-Heinz; TIEGELKAMP, Michael. IEC 61131-3: Programming Industrial Automation Systems : Concepts and Programming Languages, Requirements for Programming Systems, Decision-Making Aids . 2nd ed. New York : Springer, 2010. 390 s. ISBN 978-3-642-12014-5. item SIMOTION Motion Control TO Path Interpolation, Function Manual, Edition 04/2014 end*arab*
dc.rightsVysokoškolská závěrečná práce je autorské dílo chráněné dle zákona č. 121/2000 Sb., autorský zákon, ve znění pozdějších předpisů. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou https://knihovna.tul.cz/document/26cs
dc.rightsA university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act. https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics https://knihovna.tul.cz/document/26en
dc.rights.urihttps://knihovna.tul.cz/document/26
dc.rights.urihttps://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf
dc.subjectAutomationcs
dc.subjectmicrocontrollercs
dc.subjectmotion controllercs
dc.subjectdrivescs
dc.subjectaspherical lenscs
dc.subjectpolishingcs
dc.subjectpath interpolationcs
dc.subjectvirtual camcs
dc.subjectSIMOTION SCOUTcs
dc.subjectPROFIBUS DPcs
dc.subjectAutomationen
dc.subjectmicrocontrolleren
dc.subjectmotion controlleren
dc.subjectdrivesen
dc.subjectaspherical lensen
dc.subjectpolishingen
dc.subjectpath interpolationen
dc.subjectvirtual camen
dc.subjectSIMOTION SCOUTen
dc.subjectPROFIBUS DPen
dc.subject.verbismechatronikacs
dc.subject.verbismechatronicsen
dc.titleInovace leštičky asférických čočekcs
dc.titleInnovation of the aspherical lenses polishing machineen
dc.title.alternativecs
dc.typediplomová prácecs
local.degree.disciplineMEA
local.degree.programmeElectrical Engineering and Informatics
local.degree.programmeabbreviationN2612
local.department.abbreviationMTI
local.facultyFakulta mechatroniky, informatiky a mezioborových studiícs
local.faculty.abbreviationFM
local.identifier.stag31748
local.identifier.verbis485665
local.note.administratorsautomat
local.verbis.aktualizace2019-10-05 06:07:46cs
local.verbis.studijniprogramMTI Electrical Engineering and Informatics/Mechatronicscs
Files
Original bundle
Now showing 1 - 4 of 4
Thumbnail Image
Name:
diploma_thesis_15_05_15.pdf
Size:
5.72 MB
Format:
Adobe Portable Document Format
Description:
VSKP
Download
Thumbnail Image
Name:
Prikhodko_VP.pdf
Size:
520.18 KB
Format:
Adobe Portable Document Format
Description:
Posudek_vedouciho_VSKP
Download
Thumbnail Image
Name:
Prikhodko_OP.pdf
Size:
461.55 KB
Format:
Adobe Portable Document Format
Description:
Posudek_oponenta_VSKP
Download
Thumbnail Image
Name:
skenovani0003.pdf
Size:
218.06 KB
Format:
Adobe Portable Document Format
Description:
Prubeh_obhajoby_VSKP
Download
Collections
Fakulta mechatroniky, informatiky a mezioborových studií