Konstrukční řešení autosedaček pomocí software DesignConcept 3D
Title Alternative:CONSTRUCTIONAL SOLUTION OF CAR SEATS USING DESIGNCONCEPT 3D
Loading...
Date
2008
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Technická Univerzita v Liberci
Abstract
Tato diplomová práce vznikla za účelem poznání a porozumění softwaru DesignConcept 3D a rovněž je průzkumem do oblasti průmyslového designu. Software DesignConcept 3D od francouzské společnosti Lectra je jeden z mnoha CAD systému, který dokáže vytvořit model a rozložit jej do 2D. Tento software byl převážně navržen pro automobilový průmyslový design, konkrétně pro konstrukční řešení autosedaček. Diplomová práce je rozdělena do čtyř částí. První část pojednává o historii a vývoji CAD až po současnost. Je v ní možné nalézt charakteristiky nejznámějších a nejpoužívanějších CAD/CAM/CAE systémů. Zabývá se i hardwarovým zařízením, digitalizací (snímací zařízení a metody snímání) a technologií Rapid Prototyping, která je důležitá právě v oblasti průmyslového designu. Druhá a třetí část je zaměřena na rozbor základních funkcí při tvorbě 3D modelů v programu DesignConcept 3D. Jsou zde i postupy u jednotlivých funkcí a 3D modelů. Na přiloženém DVD jsou výuková videa jednoduchých konstrukcí reálných 3D modelů. Čtvrtá část je experimentální. Obsahuje stručný postup konstrukčního řešení spodního sedáku z reálné autosedačky v softwaru DesignConcept 3D. Podrobný postup je na přiloženém DVD. Diplomová práce byla vytvořena z dostupných pramenů a konzultací v oblasti 3D modelování.
This master thesis has been put down in order to gain knowledge and understanding of the DesignConcept 3D software and represents also a research in the industrial design sphere. Developed by the French company Lectra, the DesignConcept 3D software is one of the many CAD systems which are able to develop a model and display it in 2D. This software has been predominantly put up for the uses of the car-oriented industrial design, specifically for the construction solutions of car seats. The diploma thesis is divided into four parts. The first part explores the history and development of CAD until the present. Further, characteristics of the best known and most used CAD/CAM/CAE systems are to be found here. This section also discusses hardware equipment, digitalisation (scan equipment and scanning methods) and the Rapid Prototyping technology which is important specifically in the industrial design. The second and third parts are focused on the analysis of the functions for designing 3D models in the DesignConcept 3D programme. Furthermore, the sections include processes of the specific functions and 3D models. On the enclosed DVD, tutorial videos showing easy constructions of real 3D models can be found. The fourth part is experimental. It includes a brief process description of a construction solution of a lower seat of a real car seat according to the DesignConcept 3D software. A detailed process description can be found on the enclosed DVD. The diploma thesis has been completed with the help of available resources and consultations in the 3D modelling area.
This master thesis has been put down in order to gain knowledge and understanding of the DesignConcept 3D software and represents also a research in the industrial design sphere. Developed by the French company Lectra, the DesignConcept 3D software is one of the many CAD systems which are able to develop a model and display it in 2D. This software has been predominantly put up for the uses of the car-oriented industrial design, specifically for the construction solutions of car seats. The diploma thesis is divided into four parts. The first part explores the history and development of CAD until the present. Further, characteristics of the best known and most used CAD/CAM/CAE systems are to be found here. This section also discusses hardware equipment, digitalisation (scan equipment and scanning methods) and the Rapid Prototyping technology which is important specifically in the industrial design. The second and third parts are focused on the analysis of the functions for designing 3D models in the DesignConcept 3D programme. Furthermore, the sections include processes of the specific functions and 3D models. On the enclosed DVD, tutorial videos showing easy constructions of real 3D models can be found. The fourth part is experimental. It includes a brief process description of a construction solution of a lower seat of a real car seat according to the DesignConcept 3D software. A detailed process description can be found on the enclosed DVD. The diploma thesis has been completed with the help of available resources and consultations in the 3D modelling area.
Description
katedra: KOD; přílohy: 1 DVD; rozsah: 119 s. 27 s. příloh
Subject(s)
CAD/CAM/CAE systémy, digitalizace, rapid prototyping, 2d entity, 3d tvary, Booleovské operace, CAD/CAM/CAE systems, digitizing, rapid prototyping, 2d entities, 3d shapes, Boolean operations