MULTI-CRITERIA NUMERICAL OPTIMIZATION OF MECHANICAL PROPERTIES IN ULTRASONIC WELDING PROCESS PARAMETERS OF PVC-COATED HYBRID TEXTILES FOR WEATHER PROTECTION

Simple item page
dc.contributor.authorHUSSEN, MUKTAR SEID
dc.contributor.authorKYOSEV, YORDAN
dc.contributor.authorPIETSCH, KATHRIN
dc.contributor.authorBOLL, JESSICA
dc.contributor.authorKABISH, ABERA KECHI
dc.contributor.organizationTechnická univerzita v Liberci
dc.date.accessioned2023-05-18T08:22:48Z
dc.date.available2023-05-18T08:22:48Z
dc.description.abstractA series of research was carried out to determine the correlation between ultrasonic welding process parameters and weld seam mechanical properties. However, multi-objective numerical optimization of coated hybrid textiles for weather protection has not been addressed. To ensure a comprehensive evaluation of ultrasonic weld seams, the research investigates the optimal solution of the multi-objective function of ultrasonic welding process parameters and formulates a single criteria objective function. Lapped and superimposed types of seams were applied based on 33 factorial designs of experiments for 6 and 12 mm welding widths. Single-criteria objective functions instead of three independent problems were developed as a generalized utility function. A single-criteria optimization method was introduced through predetermined weight and normalization within the range of acceptable/unacceptable values. Numerical and graphical optimization methods were also applied to determine possible optimal solutions through generalized utility functions. The best optimal value of the generalized utility function (0.670425 and 0.944374) was attained at welding speed (2 and 2.01564 m/min), power (93.756 and 117.973 W), and pressure force (198.803 and 239.756 N) of 6 and 12 mm welding widths, respectively. The acceptable range of satisfactory values was determined for the roof and wall of awnings and camping tents through standard, in which seam performance level indicated. Nonlinear quadratic numerical models were formulated to estimate the generalized utility function, and their results were close to the regressed diagonal line against the actual points. The statistical analysis was shown a statistically significant effect of welding process parameters on the generalized utility function.cs
dc.formattext
dc.format.extent18 stran
dc.identifier.doi10.15240/tul/008/2023-2-007
dc.identifier.issn1335-0617
dc.identifier.urihttps://dspace.tul.cz/handle/15240/172136
dc.language.isocscs
dc.publisherTechnical University of Liberec
dc.publisher.abbreviationTUL
dc.relation.isbasedonSzafranska H. and Korycki R.: Multicriteria optimization of the Mechanical Properties in Laminated Seams. Materials 2021; 14: 1-10. https://doi.org/10.3390/ma14112989
dc.relation.isbasedonSarhananrhan R., Madhu M., Suresh K.S.: Multi-Objective Optimization of Plastic Welding Parameters In USPW of PMMA CM-205 Using Grey Relational Analysis, International Research Journal of Engineering and Technology, 4(6), 2017, pp. 1324-31.
dc.relation.isbasedonRamesh M. and Panneerselvam K.: Welding analysis and optimization of ultra-sonic welding in HDPE-5%PBI composite by CODAS decision-making approach, Physica Scripta, 97, 2022, pp: 1-17. https://doi.org/10.1088/1402-4896/ac8120
dc.relation.isbasedonMeng Y, Rajagopal M, Kuntumalla G, et al.: Multi-objective optimization of peel and shear strengths in ultrasonic metal welding using machine learning-based response surface methodology, Mathematical Biosciences and Engineering, 17, 2020, pp. 7411-27. https://doi.org/10.3934/mbe.2020379
dc.relation.isbasedonMongan PG, Modi V, McLaughlin JW, et al.: Multi-objective optimization of ultrasonically welded dissimilar joints through machine learning, Journal of Intelligent Manufacturing, 33, 2022, pp. 1125–1138. https://doi.org/10.1007/s10845-022-01911-6
dc.relation.isbasedonSatpathy M.P., Moharana B.R., Dewangan S. and Sahoo S.K.: Modeling and optimization of ultrasonic metal welding on dissimilar sheets using a fuzzy-based genetic algorithm approach, Engineering Science and Technology, 18, 2015, pp.634-47. https://doi.org/10.1016/j.jestch.2015.04.007
dc.relation.isbasedonHe Z., Tran K.P., Thomassey S., Zeng X., Xu J. and Yi C. Multi-objective optimization of the textile manufacturing process using deep-Q-network based multi-agent reinforcement learning, Journal of Manufacturing Systems, 62, 2022, pp. 939-49. https://doi.org/10.1016/j.jmsy.2021.03.017
dc.relation.isbasedonSada S.O.: The use of a multi-objective genetic algorithm (MOGA) in optimizing and predicting weld quality, Cogent Engineering, 7, 2020. https://doi.org/10.1080/23311916.2020.1741310
dc.relation.isbasedonZhang G., Lin T., Luo L., et al.: Multi-objective optimization of resistance welding process of GF/PP composites. Polymers, 13, 2021, pp. 2560. https://doi.org/10.3390/polym13152560
dc.relation.isbasedonCerda-Flores S.C., Rojas-Punzo A.A. and Nápoles-Rivera F. Applications of multi-objective optimization to industrial processes: A literature review, Processes, 10, 2022, pp. 133. https://doi.org/10.3390/pr10010133
dc.relation.isbasedonHussen M.S., Kyosev Y.K., Pietsch K., et al.: Effect of ultrasonic welding process parameters on seam strength of PVC-coated hybrid textiles for weather protection. Journal of Industrial Textiles, 51, 2022, pp. 1–44. https://doi.org/10.1177/15280837211057579
dc.relation.isbasedonHussen M.S., Kyosev Y.K., Pietsch K., et al.: Effect of ultrasonic welding process parameters on hydrostatic pressure resistance of hybrid textiles for weather protection, Textile Research Journal, 92, 2022, pp. 1-16. https://doi.org/10.1177/0040517520988124
dc.relation.isbasedonHussen M.S., Kyosev Y.K., Pietsch K., et al.. Effect of ultrasonic welding process parameters on peel strength of membranes for tents, Journal of Engineered Fibers and Fabrics, 17, 2022, pp. 1-19. https://doi.org/10.1177/15589250221101463
dc.relation.isbasedonHussen M.S., Kyosev Y.K., Pietsch K., et al.: Investigation of actual phenomena and auxiliary ultrasonic welding parameters on seam strength of PVC-coated hybrid textiles, AUTEX Research Journal, 2022, pp. 1-21. https://doi.org/10.2478/aut-2022-0011
dc.relation.isbasedonSzafrańska H. and Korycki R.: Analysis of mechanical properties of laminated seams, Journal of Natural Fibers, 17, 2018, pp. 398–411. https://doi.org/10.1080/15440478.2018.1498424
dc.relation.isbasedonWu C-Y, Benatar A and Mokhtarzadeh A. Comparison of Ultrasonic Welding and Vibration Welding of Thermoplastic Polyolefin. Weld World 2012; 56: 69–75. https://doi.org/10.1007/BF03321148
dc.relation.isbasedonRani R.M., Suresh K.S., Prakasan K. and Rudramoorthy R. A.: Statistical study of parameters in ultrasonic welding of plastics, Experimental Techniques, 31, 2007, pp. 53-8. https://doi.org/10.1111/j.1747-1567.2007.00182.x
dc.relation.isbasedonMacit A.S. and Tiber B. Investigation of water permeability of ultrasonic seaming on PU coated fabrics, International Periodical of Recent Technologies in Applied Engineering, 1 2019, pp. 25-9. https://doi.org/10.35333/porta.2019.22
dc.relation.isbasedonRajput C., Kumari S., Prajapati V., Dinbandhu and Abhishek K.: Experimental investigation on peel strength during ultrasonic welding of polypropylene H110MA, Materials Today: Proceedings, 26, 2020, pp. 1302-5. https://doi.org/10.1016/j.matpr.2020.02.259
dc.relation.isbasedonEN-ISO-10966:2005. Sports and recreational equipment— Fabrics for awnings and camping tents—Specification. 2005, p. 7.
dc.relation.isbasedonHEYtex. Texineering–Tarps & Tents HEYtent. In: Gruppe H, (ed.). tentorium 650 (H5571-ECO). Germany: Heytex Gruppe, 2019.
dc.relation.isbasedonEN-ISO-8937:2000. Caravan awnings—Functional requirements and test methods. 2000, p. 11.
dc.relation.isbasedonEN-ISO-5912:2020. Camping tents-Requirements and test methods. 2020, p. 24.
dc.relation.isbasedonEN-ISO-13935-1:2014. Textiles—Seam tensile properties of fabrics and made-up textile articles—Part 1: Determination of maximum force to seam rupture using the strip method. 2014, p. 7.
dc.relation.isbasedonEN-ISO-11339:2010. Adhesives—T-peel test for flexible-toflexible bonded assemblies. 2010, p. 6.
dc.relation.isbasedonEN-ISO-811:2018. Textiles—Determination of resistance to water penetration—Hydrostatic pressure test. 2018, p. 5.
dc.relation.isbasedonEN-ISO-139:2005. Textiles—Standard atmospheres for conditioning and testing. 2005, p. 6.
dc.relation.isbasedonGunantara N.: A review of multi-objective optimization: Methods and its applications, Cogent Engineering, 5, 2018, pp. 1-17. https://doi.org/10.1080/23311916.2018.1502242
dc.relation.isbasedonSaaty R.W.: The analytic hierarchy process—what it is and how it is used. Mathematical Modelling. 1987; 9: 161-76. https://doi.org/10.1016/0270-0255(87)90473-8
dc.relation.isbasedonRozkowska E.: Rank ordering criteria weighting methods–A comparative overview, OPTIMUM STUDIA EKONOMICZNE, 5, 2013, pp. 14-33. https://doi.org/10.15290/ose.2013.05.65.0
dc.relation.ispartofFibres and Textiles
dc.subjectUltrasonic weldingcs
dc.subjectWelding process parameterscs
dc.subjectTensile strengthcs
dc.subjectHydrostatic pressure resistancecs
dc.subjectPeel strengthcs
dc.subjectMulti-objective optimizationcs
dc.titleMULTI-CRITERIA NUMERICAL OPTIMIZATION OF MECHANICAL PROPERTIES IN ULTRASONIC WELDING PROCESS PARAMETERS OF PVC-COATED HYBRID TEXTILES FOR WEATHER PROTECTIONen
dc.typeArticleen
local.accessopen access
local.citation.epage73
local.citation.spage56
local.facultyFaculty of Textile Engineeringen
local.fulltextyesen
local.relation.issue2
local.relation.volume30
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
VaT_2023_2_7.pdf
Size:
1.5 MB
Format:
Adobe Portable Document Format
Description:
článek
Download
Collections
2023_30/2