Browsing by Author "Popov, Alexey"
Now showing 1 - 20 of 46
Results Per Page
Sort Options
- ItemAnalýza možných příčin uvolňování šroubového spojení.(Technická Univerzita v Liberci, 2010-01-01) Koutný, Lukáš; Popov, AlexeyThis thesis deals with finding the possible causes of the release of a bolted connection to the assembly in the crankshaft.Contains information about bold connections-threaded,power ratios,stiffness,friction,load,deformation,strength and mounting.
- ItemAnalýza vlivu ekologických procesních kapalin od firmy PARAMO, a. s. na trvanlivost nástroje a drsnost povrchu při soustružení nerezové oceli(Technická Univerzita v Liberci, 2012-01-01) Paliculin, Jan; Popov, AlexeyV bakalářské práci jsou hodnoceny vlivy jednotlivých druhů procesních kapalin na trvanlivost nástroje a drsnost povrchu při soustružení nerezové oceli. V rámci řešení byla určena metodika měření vlivů procesních kapalin na trvanlivost nástroje a drsnost povrchu při soustružení. V laboratořích katedry obrábění a montáže TUL bylo odzkoušeno pět vodou mísitelných ekologických procesních kapalin od firmy PARAMO,a.s. Úkolem této práce bylo určení procesní kapaliny s prokazatelně nejlepším vlivem na trvanlivost nástroje a drsnost povrchu při soustružení. V práci jsou dále sjednoceny dostupné informace o trvanlivosti a otupení nástroje, procesních kapalinách a integritě povrchu.
- ItemAnalýza vlivu povlaků na trvanlivost odvalovací frézy a drsnost boku zubů při odvalovacím frézování ozubených kol pro firmu WIKOV MGI, a. s.(Technická Univerzita v Liberci, 2013-01-01) Kozák, Petr; Popov, AlexeyStručný popis výroby ozubení a technologií pro výrobu, trvanlivosti nástrojů a jejího výpočtu, povlakování a technologií povlakování, drsnosti povrchu a jejího hodnocení a měření. Volba operace a povlaků pro experiment. Grafické zhodnocení průběhu opotřebení odvalovacích fréz a drsnosti boku zubu obrobku při odvalovacím frézování při použití různých druhů povlaků. Ekonomické zhodnocení použití jednotlivých povlaků. Celkové zhodnocení použití povlaků při výrobě obrobku.
- ItemAnalýza vlivu procesních kapalin na drsnost povrchu při soustružení nerezových ocelí pro firmu PARAMO, a. s.(Technická Univerzita v Liberci, 2012-01-01) Bergerhof, Jan; Popov, AlexeyIn this thesis is evaluated the influence of different types of process fluids in the turning of stainless steel, on the basis of their capability to penetrate into the cutting zone, where they effect the size of increase and the size of the turned surface roughness. The measurement results were evaluated experimentally during turning stainless steel. The framework of solution is to choose the best process fluid, which caused the best conditions when turning the stainless steel.
- ItemAnalýza vlivu procesních kapalin na kvalitu povrchu při frézováni konstrukčních ocelí pro firmu PARAMO, a. s.(Technická Univerzita v Liberci, 2012-01-01) Horák, Jan; Popov, AlexeyThe tresis compares the effects of five process fluids from PARAMO a.s., evaluation criterion was the surface roughness. The results of this work show great influence of process fluids to the surface quality in milling steel.
- ItemAnalýza vlivu procesních kapalin na kvalitu povrchu při soustružení konstrukčních ocelí pro firmu PARAMO, a. s.(Technická Univerzita v Liberci, 2013-01-01) Rak, Jaroslav; Popov, AlexeyThe aim of the bachelor´s thesis is the comparing partial qualities of six´s process fluids from the company Paramo a.s., during the turning designed of a steel. The evaluated value was the roughness of surface. The final values of this bachelor thesis show that process fluids have a big impact on the final quality of the surface during the turning of designed steel.
- ItemAnalýza vlivu procesních kapalin na řezivost brousicího kotouče při broušení konstrukční a nerezové oceli(Technická Univerzita v Liberci, 2014-01-01) Röber, Tomáš; Popov, AlexeyPráce shrnuje informace o broušení a o procesních kapalinách a jejich vzájemném vlivu. Zabývá se experimentálním měřením, jehož cílem je zhodnotit použitelnost jednotlivých kapalin s ohledem na změnu řezivosti brousicího kotouče a s ohledem na dosaženou drsnost povrchu.
- ItemAnalýza vlivu procesních kapalin na trvanlivost nástroje a kvalitu povrchu při frézování konstrukční oceli pro firmu PARAMO, a. s.(Technická Univerzita v Liberci, 2012-01-01) Zimola, Pavel; Popov, AlexeyThis Thesis includes information on durability of cutting tools (mechanisms, types and time behavior attrition), surface roughness, process fluids (technological requirements and types of fluids), milling and structural steel. This work deals with the influence of process fluids on climb and conventional milling of structural steel. The results of process fluids are evaluated in terms of tool life and machined surface roughness.
- ItemAnalýza vlivu procesních kapalin na trvanlivost nástroje a kvalitu povrchu při nesousledném frézování nerezové oceli pro firmu PARAMO, a. s.(Technická Univerzita v Liberci, 2012-01-01) Paldus, Jan; Popov, AlexeyThe work includes information on the material stainless steel milling technology. processliquids, durability and tool and wear surface roughness. The work deals with the tool life andsurface roughness using various process fluids
- ItemAnalýza vlivu procesních kapalin na trvanlivost nástroje a kvalitu povrchu při soustružení konstrukční oceli pro firmu PARAMO, a. s.(Technická Univerzita v Liberci, 2012-01-01) Černík, Michal; Popov, AlexeyIn this bachelor´s thesis is evaluated the influence of various cutting fluids on tool life and surface quality during turning. The framework of solution is to choose method of measuring and the influence of cutting fluid on tool life and surface roughness. Six water miscible cutting fluids from PARAMO, a.s. were tested in the laboratories of Department of Machining and Assembly TUL. The result of this thesis is determining the cutting fluid with the best influence on tool life and surface integrity after turning. This thesis associate available informations about cutting fluids, tool life and surface integrity after turning.
- ItemAnalýza vlivu procesních kapalin od firmy PARAMO, a. s. na trvanlivost nástroje a drsnost povrchu při frézování konstrukční oceli(Technická Univerzita v Liberci, 2013-01-01) Uždil, Petr; Popov, AlexeyThe work contains information on durability and cutting tool wear, surface roughness, and process liquids. This work deals with the influence of process fluids in conventional milling structural steel. The results of the influence of process fluids are evaluated in terms of tool life and surface roughness.
- ItemDeep Airway Inflammation and Respiratory Disorders in Nanocomposite Workers(MDPI, 2019-09-16) Pelclová, Daniela; Ždímal, Vladimír; Komarc, Martin; Vlčková, Štěpánka; Fenclová, Zdenka; Ondráček, Jakub; Schwarz, Jaroslav; Koštejn, Martin; Kačer, Petr; Dvořáčková, Štěpánka; Popov, Alexey; Klusáčková, Pavlína; Zakharov, Sergey; Bello, DhimiterThousands of researchers and workers worldwide are employed in nanocomposites manufacturing, yet little is known about their respiratory health. Aerosol exposures were characterized using real time and integrated instruments. Aerosol mass concentration ranged from 0.120 mg/m3 to 1.840 mg/m3 during nanocomposite machining processes; median particle number concentration ranged from 4.8 × 104 to 5.4 × 105 particles/cm3 . The proportion of nanoparticles varied by process from 40 to 95%. Twenty employees, working in nanocomposite materials research were examined pre-shift and post-shift using spirometry and fractional exhaled nitric oxide (FeNO) in parallel with 21 controls. Pro-inflammatory leukotrienes (LT) type B4, C4, D4, and E4; tumor necrosis factor (TNF); interleukins; and anti-inflammatory lipoxins (LXA4 and LXB4) were analyzed in their exhaled breath condensate (EBC). Chronic bronchitis was present in 20% of researchers, but not in controls. A significant decrease in forced expiratory volume in 1 s (FEV1) and FEV1/forced vital capacity (FVC) was found in researchers post-shift (p < 0.05). Post-shift EBC samples were higher for TNF (p < 0.001), LTB4 (p < 0.001), and LTE4 (p < 0.01) compared with controls. Nanocomposites production was associated with LTB4 (p < 0.001), LTE4 (p < 0.05), and TNF (p < 0.001), in addition to pre-shift LTD4 and LXB4 (both p < 0.05). Spirometry documented minor, but significant, post-shift lung impairment. TNF and LTB4 were the most robust markers of biological effects. Proper ventilation and respiratory protection are required during nanocomposites processing.
- ItemDetection and identification of engineered nanoparticles in exhaled breath condensate, blood serum, and urine of occupationally exposed subjects(SPRINGER WIEN, SACHSENPLATZ 4-6, PO BOX 89, A-1201 WIEN, AUSTRIA, 2019-03-01) Lischková, Lucie; Pelclová, Daniela; Hlušička, Jiří; Navrátil, Tomáš; Vlčková, Štěpánka; Fenclová, Zdenka; Dvořáčková, Štěpánka; Popov, Alexey; Michalcová, Alena; Marek, Ivo; Marek, Ivo; Mikuška, Pavel; Ždímal, Vladimír; Koštejn, Martin; Ondráček, Jakub; Schwarz, Jaroslav; Zakharov, SergeyThe use of nanotechnology and the fields of application of nanomaterials are growing vastly, but the negative health effects on the exposed employees are not well studied. The standardized methods of monitoring of occupational exposure are still absent. The task of occupational physicians is to find the ways of evaluation of potential risks of exposure to engineered nanoparticles and to determine the biomarkers for early diagnostics and prevention of occupational diseases. The aim of our study was to detect and identify engineered nanoparticles in biological samples received from occupationally exposed subjects and to evaluate the association of findings with the results of external aerosol measurements on the workplace. The study cohort consisted of two groups of subjects. The first group was exposed to engineered nanoparticles containing mainly iron, manganese, and carbon compounds; the second group was exposed to the nanoparticles containing copper oxide. The post-shift biological samples (urine, blood serum, and exhaled breath condensate) were collected. The analysis was performed by transmission electron microscopy and energy-dispersive spectroscopy. The nanoparticles were detected in all the biological samples. The most common identified chemical elements were the biogenic ones (carbon, potassium, chlorine, oxygen), but the nanoparticles containing metals were identified in EBC, blood, and urine as well (gold, silver, copper, lanthanum, cerium, and tantalum). Our results demonstrate the possibility of detection of occupational exposure to the engineered nanoparticles in human biological fluids. Further studies are necessary to compare the pre-shift and post-shift burden of samples with engineered nanoparticles and to determine the magnitude of occupational exposure during the shift.
- ItemEffect of hydraulic oil entering the cutting fluid on the tool life and roughness in milling of structural steel(2019-06-01) Popov, Alexey; Khramenkov, MikhailThanks to their chemical and physical properties, the cutting fluids can significantly affect the process of machining - the use of cutting fluid reduces the roughness of the machined surface and increases the tool life. However, during the machining the oil from the hydraulic system of the machine often gets into the cutting fluid, which can alter the properties of the cutting fluid. In scientific literature there is no information on the effect of the hydraulic oil entering the cutting fluid on the tool life and roughness in machining of the structural steel. In this regard, at the laboratory of the Department of Machining and Assembly of the Technical University of Liberec, there has been conducted a study to ascertain the effects of hydraulic oil getting into different types of cutting fluids during the milling of structural steel.
- ItemEffect of hydraulic oil entering the cutting fluid on the tool life and roughness in turning of stainless steel(J. E. Purkyne University in Usti nad Labem, 2019-01-01) Popov, Alexey; Khramenkov, MikhailThe use of cutting fluid should positively influence on the quality of the machined surfaces and durability of cutting tools. However, during the machining the oil from the hydraulic system of the machine often gets into the cutting fluid, which can alter the properties of the cutting fluid. In scientific literature there is no information about the effect of the hydraulic oil entering the cutting fluid on the tool life and roughness in turning. In this regard, at the laboratory of the Department of Machining and Assembly of the Technical University of Liberec, there has been conducted a study to ascertain the effects of hydraulic oil getting into different types of cutting fluids during the turning of stainless steel.
- ItemEkologické obráběcí kapaliny nové generace(2014-01-01) Jersák, Jan; Popov, Alexey; a kolektiv autorůVýzkumný projekt TA02021332 „Ekologické obráběcí kapaliny nové generace“ byl řešen ve společnosti PARAMO, a.s. a na pracovištích Technické univerzity v Liberci. Projekt spojil dvě oblasti průmyslu - aplikovanou chemii a strojírenství. Cílem výzkumného projektu byl vývoj, testovaní a poloprovozní ověření zcela nové generace ekologických kapalin pro obrábění, které v maximální míře garantují ochranu zdraví, ekologické požadavky a zaručují maximální produktivitu při požadované kvalitě povrchu obrobků. Ve společnosti PARAMO, a.s. byly vyvinuty nové formulace procesních kapalin, které jsou šetrné k obsluze obráběcích strojů, vyznačují se snadnou biologickou odbouratelností a dají se snadno likvidovat. V laboratořích Technické univerzity v Liberci byly vlastnosti nově vyvinutých procesních kapalin podrobně analyzovány při technologii soustružení, frézování, vrtání a broušení. Experimentálně byl hodnocen účinek kapalin na trvanlivost řezných nástrojů, příp. na řeznou sílu při broušení, na drsnost povrchu obrobků, na tvar vzniklých třísek, na ulpívání procesních kapalin na obrobcích, byla vyšetřována antiadhezní schopnost procesních kapalin a vliv procesních kapalin na magnetoelastický parametr, který charakterizuje stav povrchové vrstvy obrobků z hlediska zbytkového napětí, tvrdosti a mikrostruktury. Publikace je souhrnem nejdůležitějších poznatků, výsledků a závěrů, které byly během řešení výzkumného projektu shromážděny. Publikace je určena pro pracovníky ze strojírenské praxe, technology a studenty strojních fakult vysokých škol.
- ItemEkologické obráběcí kapaliny nové generace(2014-01-01) Jersák, Jan; Popov, Alexey
- ItemMarkers of Oxidative Stress in the Exhaled Breath Condensate of Workers Handling Nanocomposites(MDPI, 2019-08-10) Pelclová, Daniela; Ždímal, Vladimír; Schwarz, Jaroslav; Dvořáčková, Štěpánka; Komarc, Martin; Ondráček, Jakub; Koštejn, Martin; Kačer, Petr; Vlčková, Štěpánka; Fenclová, Zdenka; Popov, Alexey; Lischková, Lucie; Zakharov, Sergey; Bello, DhimiterResearchers in nanocomposite processing may inhale a variety of chemical agents, including nanoparticles. This study investigated airway oxidative stress status in the exhaled breath condensate (EBC). Nineteen employees (42.4 ± 11.4 y/o), working in nanocomposites research for 18.0 ± 10.3 years were examined pre-shift and post-shift on a random workday, together with nineteen controls (45.5 ± 11.7 y/o). Panels of oxidative stress biomarkers derived from lipids, nucleic acids, and proteins were analyzed in the EBC. Aerosol exposures were monitored during three major nanoparticle generation operations: smelting and welding (workshop 1) and nanocomposite machining (workshop 2) using a suite of real-time and integrated instruments. Mass concentrations during these operations were 0.120, 1.840, and 0.804 mg/m3 , respectively. Median particle number concentrations were 4.8 × 104 , 1.3 × 105 , and 5.4 × 105 particles/cm3 , respectively. Nanoparticles accounted for 95, 40, and 61%, respectively, with prevailing Fe and Mn. All markers of nucleic acid and protein oxidation, malondialdehyde, and aldehydes C6–C13 were elevated, already in the pre-shift samples relative to controls in both workshops. Significant post-shift elevations were documented in lipid oxidation markers. Significant associations were found between working in nanocomposite synthesis and EBC biomarkers. More research is needed to understand the contribution of nanoparticles from nanocomposite processing in inducing oxidative stress, relative to other co-exposures generated during welding, smelting, and secondary oxidation processes, in these workshops.
- ItemMezinárodní obchod Velké Británie s Evropskou unii po Brexitu(2022-11-01) Popov, Alexey; Demel Jaroslav, Ing. Ph.D. :60633Bakalářská práce zkoumá, jak se změnil obchod Británie s Evropskou unií po vstupu Brexitu v platnost. Chronologicky ukazuje proces evropské integrace a to, jak se na něm podílela Velká Británie. Různé faktory vedly britskou monarchii k odchodu z Evropské unie. Závěrečná část práce shrnuje výzkum změn v obchodu a také nastiňuje možné důsledky pro Británii a země Evropské unie.
- ItemOptimalizace kritéria opotřebení vyměnitelných břitových destiček při soustružení součástí převodovek ve firmě ŠKODA-Auto, a.s.(Technická Univerzita v Liberci, 2010-01-01) Isach, Daniel; Popov, AlexeyThe Department of machining and assembly of the Technical University of Liberec has been carried out research work for determining the optimal size of the wear of cutting inserts for turning structural steel. Were tested cermet inserts and cemented carbide inserts suppliers Sandvik Coromant for turning steel 16 220. The result of research work has been determining the optimal size of the wear of cutting inserts.
- «
- 1 (current)
- 2
- 3
- »