Browsing by Author "Kroisová, Dora"
Now showing 1 - 20 of 30
Results Per Page
Sort Options
- ItemBiodegradovatelné kompozitní systémy s vyztužujícími přírodními vlákny - vliv typu vlákna a plnění na vybrané mechanické parametry(Technická Univerzita v Liberci, 2007) Hložková, Iveta; Kroisová, DoraThe work deals with possibilities to replace synthetic fibres by natural fibres in polymer matrices. The goal of this work is to explore the influence of natural fibres type (flax, hemp, bamboo, cellulose fibres from recycled paper) and quantity of fulfilment (3 %, 6 %, 9 %, 30 %) to fundamental mechanical parameters (tensile strenght, Young`s modulus, elongation to fracture).
- ItemBiogenic silicon dioxide nanoparticles processed from natural sources(TAYLOR & FRANCIS INC, 530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA, 2020-04) Adach, Kinga; Kroisová, Dora; Fijalkowski, MateuszThe main purpose of this study is to obtain the biogenic silica nanoparticles from selected types of plants and thorough characterization. Plants create SiO2 nanoparticles while growing from the colloidal solution of orthosilicic acid contained in the soil. Together with acid, they absorb additional ions that are essential for their growth, which was found using SEM and EDX analysis. The organic part of the plants was removed using a two-step method. Firstly, the plants were purified in 10% HCl in order to remove undesirable ions. Next, the optimal degradation temperatures were determined according to TGA results that varies between 500-650 degrees C. After the above-mentioned processes silica was studied using ICP-OES, FTIR, TEM, and N-2 adsorption. The nanoparticles obtained from the investigated kinds of plants showed an amorphous structure, differed in size (from 8 to 20 nm) and are not purely symmetrical in any of the investigated samples. Estimated content of SiO2 nanoparticles was in the range 11.5-25.3% depending on the sample. The specific surface area was measured using the BET method.
- ItemElektromagnetické vlastnosti geopolymerů(Technická Univerzita v Liberci, 2009) Richter, Aleš; Kroisová, DoraBachelor's thesis deals with electromagnetic properties of geopolymers. These composites are not fully known and the existing research has primarily focused on the mechanical properties. The verification of the geopolymers behavior in electromagnetic field is the original and therefore the work is only indicative measurement of electrical parameters. The aim is to define the basic electromagnetic properties of geopolymers and to suggest their possible application in electrical engineering. The introduction of the work present all the possibilities of measurement methods and then it follows computing and evaluation of geopolymer material constants. The conclusion is about comparison of the results and recommendations of the suitability for further use in terms of electrical engineering.
- ItemGeopolymerní kompozitní systémy a jejich odolnost k dynamickému namáhání(Technická Univerzita v Liberci, 2014) Láník, Pavel; Kroisová, DoraCílem práce bylo zjistit vliv dynamického namáhání na připravené geopolymerní kompozitní systémy. Na základě komplexního rozboru všech dosažených výsledků lze říci, že dynamické namáhání aplikované na připravené vzorky geopolymerních kompozitních systémů vyztužených vybranými druhy vláken (skelných, čedičových, uhlíkových) i v různých strukturních uspořádáních (punčoška, podélná vlákna) zprostředkované vibracemi o kmitočtu 50 Hz aplikovanými po dobu 24 hodin mají vliv pouze na jisté typy vzorků v závislosti na chemickém složení vláken, adhezi vláken k matrici, rozložení vláken a kvalitě přípravy vzorků.
- ItemHodnocení pevnosti lepeného spoje(Technická Univerzita v Liberci, 2006) Blecha, Jan; Kroisová, DoraThis bachelor work deals with strength evaluation of a bonded joint and its effects affecting this strength, mainly by effect of surface adjustment of bonded areas. The tested samples made of unalloyed steel 11 373 were glued together by epoxy resin ChS Epoxy 371 and curing agent P11 in the ratio of 100 : 6,5. The strength of bonded joint was determined by tensile test on device unit FP 100-Lab Test II. The basic characteristics of a bonded joint and glues are summarises in the theoretical part. Samples, characteristics of epoxy resin and curing agent, measuring methods and calculations necessary for determination of a threshold of strength of a bonded point are described in the experimental part. The measured and calculated rates were processed into figures and diagrams.
- ItemHodnocení vybraných parametrů recyklovaného polykarbonátu pro jeho použití v osvětlovací technice automobilu(Technická Univerzita v Liberci, 2011) Procházka, Jan; Kroisová, DoraIncrease in effectiveness, environmental aspects and maximum utilization of material sources leads to technological reprocessing of polymers. In case of materials for headlamps, polycarbonate is the most widespread material because of its good thermal stability and suitable technological parameters. However, higher level of reprocessing cycles leads to worse material characteristics. Determination of mechanical properties ? flexural strength and impact strength and determination of technological properties ? melt flow rate and ability of metalizing were the aim of this work. Results show that only the zero and first time recycled materials are suitable for automotive headlamp industry. Findings of this work will be applied in production process.
- ItemHodnocení vybraných vlastností geopolymerních materiálů plněných vláknovými plnivy(Technická Univerzita v Liberci, 2012) Šolc, Miroslav; Kroisová, DoraThis bachelor work deals with strength evaluation of geopolymer materials filled with fiber filler. The theoretical part describes the properties, uses and other general information about geopolymers and all the fillers used in the experiment. The experiment section describes the test method, workflow, test samples and their composition and editing. Mesured and calculated values are summarized in tables and graphs.
- ItemMožnosti recyklace plastů v obalové technice se zaměřením na PET lahve(Technická Univerzita v Liberci, 2010) Šťastný, Michal; Kroisová, DoraThis bachelor work deals with the possibilities of recycling of plastics in packaging technology with a focus on PET bottles. Samples made from preforms were used for the tensile test and micro hardness. Based on the design of the PET measurement models are assessed importance of recycling. The basic information about the material of polyethylene terephthalate and its use as packaging material for PET bottles was described in the theoretical part. Moreover there is an overview of the material properties of PET resin respectively of recycled and their relative comparison in terms of technical and economic. This section has provided a general overview of different ways of recycling. A specific method of recycling PET bottles in operation of company PETKA CZ a.s. was described in the experimental part. Furthermore measurements were carried out on samples of PET flakes to provide general information about the resulting quality of recycled material, using recycling technology known as wet process. Micro hardness test and tensile test were tested the platelet samples of PET. All measured and calculated values are summarized in tables and graphs.
- ItemMožnosti využití geopolymerních materiálů jako povlaků konstrukčních prvků(Technická Univerzita v Liberci, 2011) Pavčo, Lukáš; Kroisová, DoraThis bachelor's thesis deals with the possibilities of usage geopolymeric materials as coatings for constructional components. The main aim of this thesis is to find out the possible way of applying the geopolymer on the base (ground) material and to study its adhesion towards the base material as well as to discover more about its capability of enduring and protecting against high temperatures which are so called borderline for the base material. 2 geopolymeric materials were tested: Q13 and Q17. The base material surface came through the preparation procedures after which the following tests and experiments were made.
- ItemMožnosti využití odpadních a recyklovaných vláken v geopolymerních kompozitních systémech(Technická Univerzita v Liberci, 2014) Špačková, Romana; Kroisová, DoraTato diplomová práce se zabývá studiem možnosti využití odpadních a recyklovaných vláken v geopolymerních kompozitních systémech. Pro hodnocení vlivů vlákenné výztuže byly použity tři typy vláken a to odpadní vlákna čedičová, skelná a recyklovaná uhlíková vlákna. Na základě provedených měření zkouška tlakem - byl zjištěn vliv typu vláken a množství přidaných vláken na vlastnosti hodnocených kompozitních systémů.
- ItemNanočástice biogenního oxidu křemičitého(Technická Univerzita v Liberci, 2016) Kirnerová, Petra; Kroisová, DoraDiplomová práce seznamuje s nanomateriály a nanočásticemi v přírodních objektech. Ke studiu stavby studovaného objektu, povrchu a analýze prvků byla použita počítačová tomografie (CT) a elektronový rastrovací mikroskop (SEM) s EDX analýzou. Dále termogravimetrická analýza (TGA) s FTIR analýzou pro popis chemického složení rostlinného objektu. Využit byl také transmisní elektronový mikroskop (TEM). Ke studiu byla vybrána přeslička rolní (Equisetum arvense), z níž byly získány nanočástice oxidu křemičitého. K úpravě vzorků byly použity chemické a fyzikální metody (chemické přečištění pomocí kyselin a využití mikrovlnného mineralizátoru). Byla sledována a popsána velikost částic, jejich vazba na organickou fázi a možnosti získávání oxidu křemičitého z přesličky rolní.
- ItemNanočástice v přírodních materiálech(Technická Univerzita v Liberci, 2015) Vlček, Jan; Kroisová, DoraCílem bakalářské práce je seznámení s nanočásticemi v přírodních materiálech. Pomocí rastrovacího elektronového mikroskopu a EDX analýzy byla provedena analýza struktury a prvků vyskytujících se v rostlinném objektu. Pro pozorování byla vybrána přeslička rolní (Equisetum arvense), ve které byly identifikovány nanočástice na bázi oxidu křemičitého. K rozboru byly použity chemické a fyzikální metody, na základě kterých byla sledována velikost částic, jejich vazba na organickou fázi a možnost získání oxidu křemičitého z rostliny.
- ItemOptimalizace vlastností geopolymerní matrice vybranými plnivy(Technická Univerzita v Liberci, 2012) Le chi, Hiep; Kroisová, DoraThis thesis deals with the optimization of properties of geopolymer mortar and concrete fillers.The main aim of this thesis is to find out the optimal percentage of fibers (Isover granulate fiber and basalt fiber) in mortar and concrete to achieve the best properties of mortar and concrete.Some ideas which refer to the topic are described in the theoretical part. Composites, Isover granulate and basalt fibers are explained and described here. In the experimental part two experiments are proposed. In the first experiment fiber fillers are added into the geopolymer mortar. The other experiment investigates utilization of fiber fillers with geopolymer concrete.
- ItemPřírodní organicko-anorganická plniva v polymerních systémech(Technická Univerzita v Liberci, 2015) Luňák, Kryštof; Kroisová, DoraCílem mé diplomové práce bylo seznámit se s vybraným typem organicko-anorganického plniva, navrhnout polymerní systém, na kterém budou experimenty realizovány, navrhnout množství plniva, na kterém bude jeho vliv na polymerní matrici experimentálně vyhodnocován, navrhnout přípravu jednotlivých typů vzorků a vhodné materiálové zkoušky k posouzení chování plniva v připraveném polymerním - kompozitním systému. Jako plniva bylo použito namletých rýžových slupek. Polymerní matricí byla dvousložková epoxidová pryskyřice vytvrzená tvrdidlem. Množství plniva bylo stanoveno na 1 dsk respektive 10 dsk rozemletých rýžových slupek. Pro tyto polymerní - kompozitní systémy byly aplikovány a vyhodnoceny vhodné materiálové zkoušky.
- ItemPřírodní rostlinná vlákna jako vyztužující materiál polymerních systémů - vliv plnění na vybrané mechanické parametry(Technická Univerzita v Liberci, 2007) Spilka, Jaroslav; Kroisová, DoraThe aim of this bachelor work is to study the possibility of exploitation of natural plant fibers as a reinforcement of polymer matrices. The influence of filler amount on the selected mechanical properties was study.
- ItemPřírodní rostlinná vlákna jako vyztužující prvky polymerních matric kompozitních systémů(Technická Univerzita v Liberci, 2007) Šimko, Milan; Kroisová, DoraPředmětem diplomové práce je seznámení s přírodními rostlinnými vlákny a jejich využitím jako vyztužujících prvků vícesměrných kompozitních systémů s polymerní matricí. Za přírodní vlákna byl vybrán bambus a technické konopí. Polymer použitý jako matrice kompozitního systému byl polypropylen. Pro zlepšení kvality vytvářeného mezifázového rozhraní mezi vyztužujícími vlákny a matricí, vzniklého v důsledku spojování hydrofilního a hydrofobního materiálu, bylo použito studené plazma, kterým byl modifikován povrch práškového polymeru. Za účelem dosažení různé povrchové modifikace byly jako pracovní plyny použity kyslík a vzduch.
- ItemŠroubový spoj kompozitního systému na bázi uhlíková výztuž - polymerní matrice(Technická Univerzita v Liberci, 2016) Urban, Tomáš; Kroisová, DoraV předkládané diplomové práci byl zkoumán vliv šroubového spoje na vlastnosti spojovaných dílů z uhlíkového dlouhovlákného kompozitu s epoxidovou matricí. Pomocí technologie ruční kontaktní laminace s následným lisováním za pokojové teploty byly vyrobeny kompozitní vzorky s kvaziizotropní skladbou vrstev uhlíkové tkaniny (0/90/45/-45) ve třech různých tloušťkách (2, 4 a 6 vrstev). Následné tahové zkoušce byly podrobeny 3 varianty vzorků, konkrétně vzorky ve tvaru destičky s prázdnou dírou, vzorky ve tvaru destičky s plnou dírou (šroubovým spojem) a nakonec vzorky ve formě přeplátovaného šroubového spoje. Byly změřeny základní mechanické vlastnosti dle norem ASTM a vyvozeny závěry ohledně chování těchto spojů při tahovém namáhání a zhodnocení vlivu tloušťky. Součástí závěru jsou též obecná doporučení při použití šroubových spojů u kompozitů s epoxidovou matricí.
- ItemStanovení mikrotvrdosti polymerů jako metoda indikace stavu vytvrzovacích a krystalizačních pochodů(Technická Univerzita v Liberci, 2006) Šťastná, Petra; Kroisová, DoraThis work deals with us of microhardness as evaluation method for indication of crystallization and hardening of polymers. Common plastic materials, their subdivision, parameters, crystallization and hardening of polymers is described are the theoretical part. Preparation of specimens, measuring method and evaluation are described in the experimental part.
- ItemStudium charakteru a chování povrchových vrstev u vybraných rostlinných objektů(Technická Univerzita v Liberci, 2012) Habelová, Eva; Kroisová, DoraThe content of the thesis is the study of the structure character and surface behavior of selected plant objects. Were selected: jarrah red-flower, banksia integrifolia, rose Ena Harkness, polyanthus veris, yellow daffodil, alchemilla vulgaris and sparmania africana. The leaves were dried and measured their surface wettability. Plant surfaces were also evaluated their surfaces by scanning electron microscope. Wettability of the surfaces of plants is consistent with their surface structure.
- ItemStudium porézních struktur v přírodních objektech(Technická Univerzita v Liberci, 2013) Urban, Tomáš; Kroisová, DoraThe aim of bachelor thesis is to introduce the porous structures of natural and technical materials and describe in detail the structure of ten selected natural objects by using scanning electron microscopy. For observation was chosen skeleton and tooth of black urchin, skeleton of heart urchin, cuttlebone, chicken eggshell, umbrella palm stem, soft rush stem, elderberry stem, scots pine bark and endoskeleton of sea sponge. Acquired knowledge about natural objects were then used to compare with technical materials.