Browsing by Author "Hotař, Adam"
Now showing 1 - 10 of 10
Results Per Page
Sort Options
- ItemHořáková soustava linky TAVHotař, Adam
- ItemKorozní odolnost aluminidu železa Fe28Al3Cr0,02Ce ve sklovině(Technická Univerzita v Liberci, ) Hotař, Adam
- ItemKorozní odolnost aluminidů železa na bázi Fe3Al ve sklovině(Technická Univerzita v Liberci, 2007) Frintová, Anna; Hotař, AdamSubject of this bachelor's thesis is to determine the corrosive resistance of the iron aluminides based on Fe3Al in lead glass. The corrosion resistance of iron aluminides was compared to that of chromium-nickel steel. The theoretical part of the thesis deals with the iron aluminides in general (i.e. their mechanical properties, corrosion resistance, etc.) and about behaviour of metals in molten glasses. The experimental part of the thesis describes the testing methods of the samples, evaluation of the corrosive resistance and finally the comparison of the experimental results.
- ItemKorozní odolnost slitin na bázi Fe3Al ve vybraných sklovinách(Technická Univerzita v Liberci, 2010) Boháček, Jan; Hotař, AdamThe task of this thesis was determined the corrosion resistance of alloys based Fe3Al (Fe3Al Fe-25.41Al-5.23Cr, Fe-31.5Al-3.11Cr-0.005Ce, Fe-29Al-1.4Ti-0.31B, Fe-28.06Al-2.85Cr-0.53Zr) and chromium nickel steel in selected glasses. Tests were carried out in leaded crystal and opal glass. The resistance of all materials was investigated at 1200° C and the time interval 13-96 hours. A result of this work is a graphical representation of the weight increases / decreases of intermetallics and chromium nickel steel ČSN 417 255. Coloring of glass and surface roughness of the samples where also evalvated after 96 hours of corrosion test. The roughness of a samples, which was established statistical tools and compass dimensions, was compared with the initial state (before corrosion tests).
- ItemOptimalizace procesu tepelného zpracování dílů převodovky z hlediska deformací(Technická Univerzita v Liberci, 2011) Kracík, Jan; Hotař, AdamThis thesis examines the impact of heat treatment on deformation of hole of driven wheel transmission. It is an evaluation of the measured results to design the optimal geometry of the processed parts to be suitable for quenching in oil and gas pressure quenching.
- ItemOptimalizace způsobu nitridace těla soustružnických nožů z oceli 16 343(Technická Univerzita v Liberci, 2016) Pravda, Štefan; Hotař, AdamCílem diplomové práce je porovnat a optimalizovat způsoby nitridace řezných nástrojů, respektive těl soustružnických nožů vyráběných ve firmě Karned Tools s.r.o. Úvod práce seznamuje s teorií o tepelném a chemicko-tepelném zpracování ocelí se zaměřením na nitridování a jeho metody. V experimentální části jsou porovnány tři možné metody nitridace soustružnických nožů. Bylo provedeno měření mikrotvrdosti, metalografické šetření a navíc k tomu chemická analýza nitridovaných vzorků. Výsledky byly porovnány a vyhodnoceny.
- ItemVliv podmínek kryogenního tepelného zpracování na strukturu a vlastnosti nástrojové oceli(Technická Univerzita v Liberci, 2012) Pelc, Martin; Hotař, AdamBachalar work is dealing up with issues of cryogenic heat treatment. Part of the work is experiment in which were been examined 8 samples. On every samples was detected basic mechanical properties and picture of structure was created on optical microscope. Result was comparing individual samples in terms of temperature of freezing, time delay on this temperature and process stability.
- ItemVliv způsobu tepelného zpracování na deformace ozubených kol(Technická Univerzita v Liberci, 2011) Rudolf, Miroslav; Hotař, AdamBachelor work deals with comparing methods of hardening press and free hardening. Methods are compared on the basis of evaluation deformations characteristics and hardness map line. This work chooses better method appoint on the basis of measuring results and production cost.
- ItemVliv způsobu tepelného zpracování na deformace soustružnických nožů(Technická Univerzita v Liberci, 2014) Pravda, Štefan; Hotař, AdamCílem bakalářské práce je porovnat vlivy tepelného zpracování na deformace vnitřních soustružnických nožů vyráběných ve firmě Karned Tools s.r.o. Úvod práce seznamuje s teorií o tepelném zpracování ocelí se zaměřením na nerovnovážné tepelné zpracování - kalení a problematikou následků tepelného zpracování. V experimentální části je porovnán vliv současného tepelného zpracování nožů a nové technologie tepelného zpracování na vznik deformací. Bylo provedeno měření a porovnávání deformací, měření tvrdosti a strukturní šetření. K tomu byl ještě porovnán vliv stávající technologie soustružení polotovarů s nově navrhnutou technologií souosého soustružení.
- ItemVysokoteplotní oxidační a korozní odolnost slitin na bázi aluminidů železa(2020) Hotař, AdamHabilitační práce je zaměřena na studium oxidačního a korozního chování aluminidů železa za vysokých teplot. Výzkum je založen na rozsáhlých vysokoteplotních oxidačních a korozních testech, které umožňují pomocí termogravimetrické analýzy definovat kinetiku oxidace či koroze slitin. Vysokoteplotní chování slitin na bázi Fe3Al na vzduchu a ve sklovině je popsáno na základě analýz okují či korozních produktů. Je použita především rentgenová difrakce, elektronová mikroskopie, energiově dispersní analýza, EBSD a také optická mikroskopie. Je popsán vliv legujících prvků především zirkonia, dále tantalu, céru a titanboridu na oxidační chování Fe3Al slitin. Podrobná analýza oxidů a struktury pod povrchem aluminidů železa určuje fázové složení okují a charakter oxidace slitin v závislosti na chemickém složení slitiny a podmínek oxidace. Je popsáno také korozní chování Fe3Al slitin v sodnovápenaté sklovině a v olovnatém křišťálu. K popisu a kvantifikaci korozního nebo oxidačního napadení aluminidů železa a srovnávacích ocelí je nově použita metodika využívající fraktální geometrii a statistické nástroje.