Experimental Investigation of the Continual Jet
dc.contributor | Novotný Jan, doc. Ing. Ph.D. : 67173 | |
dc.contributor.advisor | Dančová Petra, doc. Ing. Ph.D. : 57854 | |
dc.contributor.author | Boob, Sudarshan Shamsundar | |
dc.date.accessioned | 2019-10-14T10:29:06Z | |
dc.date.available | 2019-10-14T10:29:06Z | |
dc.date.committed | 2020-4-30 | |
dc.date.defense | 2019-05-29 | |
dc.date.submitted | 2018-11-1 | |
dc.date.updated | 2019-5-29 | |
dc.degree.level | Ing. | |
dc.description.abstract | This thesis work primarily focusses on the study of the structure and development of the free jet generated though the round air jet nozzle. It also involves the study of the velocity fields generated by round jet at the nozzle exit velocity 5.67 m/s and with corresponding Reynolds number of 3070.The investigation was carried out in 2D (stereo PIV) and 3D (Tomo PIV). The scope of the study was further extended to understand the characteristics of all three velocity components in the developing shear layer and deriving the pressure fields over the space using the available velocity field data. Pulsed laser sheets were aligned such that it illuminates the centreline plane of the jet. The set-up was calibrated to translate the resulting pixel displacements into X, Y, and Z velocity components. The measurement was done with varying the laser power and varying the laser pulse time i.e. delay time. For measurement of the Tomo PIV the volume optics were used also volume self-calibration were carried out. The tracer particles used in the experiment were generated from the vegetable oil and compressed air was used for providing the necessary acceleratory movement to the particles. The result helped to study the different structures and development of the free jet along its centreline axis direction. The velocity range over entire field and pressure variations along the streamline axis are discussed. The maximum particle velocity was found to be 25 m/s in the jet core. | cs |
dc.description.abstract | This thesis work primarily focusses on the study of the structure and development of the free jet generated though the round air jet nozzle. It also involves the study of the velocity fields generated by round jet at the nozzle exit velocity 5.67 m/s and with corresponding Reynolds number of 3070.The investigation was carried out in 2D (stereo PIV) and 3D (Tomo PIV). The scope of the study was further extended to understand the characteristics of all three velocity components in the developing shear layer and deriving the pressure fields over the space using the available velocity field data. Pulsed laser sheets were aligned such that it illuminates the centreline plane of the jet. The set-up was calibrated to translate the resulting pixel displacements into X, Y, and Z velocity components. The measurement was done with varying the laser power and varying the laser pulse time i.e. delay time. For measurement of the Tomo PIV the volume optics were used also volume self-calibration were carried out. The tracer particles used in the experiment were generated from the vegetable oil and compressed air was used for providing the necessary acceleratory movement to the particles. The result helped to study the different structures and development of the free jet along its centreline axis direction. The velocity range over entire field and pressure variations along the streamline axis are discussed. The maximum particle velocity was found to be 25 m/s in the jet core. | en |
dc.description.mark | ||
dc.format | 73p. (14 622 characters) | |
dc.format.extent | Grafy, Tabulky No | |
dc.identifier.signature | V 201901442 | |
dc.identifier.uri | https://dspace.tul.cz/handle/15240/153989 | |
dc.language.iso | an | |
dc.relation.isbasedon | matsymblbrack1matsymbrbrack WIENEKE, Bernhard. PIV Uncertainty Quantification and Beyond. Unpublished [online]. 2017 [vid. 2019-04-25]. Dostupné z: doi:10.13140/rg.2.2.26244.42886 | |
dc.relation.isbasedon | vsp5mm matsymblbrack2matsymbrbrack NEETESON, N. J., S. BHATTACHARYA, D. E. RIVAL, D. MICHAELIS, D. SCHANZ a A. SCHRÖDER. Pressure-field extraction from Lagrangian flow measurements: first experiences with 4D-PTV data. Experiments in Fluids [online]. 2016, 57(6) [vid. 2019-04-25]. ISSN 0723-4864, 1432-1114. Dostupné z: doi:10.1007/s00348-016-2170-4 | |
dc.relation.isbasedon | vsp5mm | |
dc.rights | Vysokoškolská závěrečná práce je autorské dílo chráněné dle zákona č. 121/2000 Sb., autorský zákon, ve znění pozdějších předpisů. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou https://knihovna.tul.cz/document/26 | cs |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act. https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics https://knihovna.tul.cz/document/26 | en |
dc.rights.uri | https://knihovna.tul.cz/document/26 | |
dc.rights.uri | https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf | |
dc.subject | Development of free jet | cs |
dc.subject | nozzle geometry | cs |
dc.subject | Tomo-PIV | cs |
dc.subject | stereo PIV | cs |
dc.subject | continual jet | cs |
dc.subject | vorticity | cs |
dc.subject | pressure distribution | cs |
dc.subject | tracer particle | cs |
dc.subject | PIV errror | cs |
dc.subject | PIV uncertainity quantification | cs |
dc.subject | Development of free jet | en |
dc.subject | nozzle geometry | en |
dc.subject | Tomo-PIV | en |
dc.subject | stereo PIV | en |
dc.subject | continual jet | en |
dc.subject | vorticity | en |
dc.subject | pressure distribution | en |
dc.subject | tracer particle | en |
dc.subject | PIV errror | en |
dc.subject | PIV uncertainity quantification | en |
dc.title | Experimental Investigation of the Continual Jet | cs |
dc.title | Experimental Investigation of the Continual Jet | en |
dc.type | diplomová práce | cs |
local.degree.abbreviation | Navazující | |
local.degree.discipline | KSA | |
local.degree.programme | Mechanical Engineering | |
local.degree.programmeabbreviation | N2301 | |
local.department.abbreviation | KEZ | |
local.faculty | Fakulta strojní | cs |
local.faculty.abbreviation | FS | |
local.identifier.author | S17000499 | |
local.identifier.stag | 39730 | |
local.identifier.verbis | kpw06584678 | |
local.note.administrators | automat | |
local.poradovecislo | 1442 |
Files
Original bundle
1 - 4 of 4
Loading...
- Name:
- Sudarshan_Thesis.pdf
- Size:
- 4.67 MB
- Format:
- Adobe Portable Document Format
- Description:
- VSKP
Loading...
- Name:
- Posudek_DP_Boob_Dancova.pdf
- Size:
- 99.45 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_vedouciho_VSKP
Loading...
- Name:
- Posudek_DP_Boob_Novotny.pdf
- Size:
- 494.96 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_oponenta_VSKP
Loading...
- Name:
- ProtokolSPrubehemObhajobySTAG.pdf
- Size:
- 12.37 KB
- Format:
- Adobe Portable Document Format
- Description:
- Prubeh_obhajoby_VSKP