Konstrukce vstřikovací formy pro navržený díl
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Diplomová práce se zabývá konstrukčním návrhem dvoudeskové vstřikovací "family" formy s horkým vtokovým systémem. V úvodní části konstruování formy je proveden předběžný návrh dílčích častí vstřikovací formy a následně je věnována pozornost podrobnému návrhu komponent a systémům vstřikovací formy. Geometrie a rozměr ústí horkého vtokového systému je navržen s využitím simulačního softwaru Cadmould, čímž se docílilo rovnoměrného plnění obou dutin. Temperační systém je navržen opět ve spolupráci se simulačním softwarem, díky kterému se zajistil rovnoměrný odvod tepla z povrchu dutiny formy. Dále se navrhuje mechanický systém vyhazování s vyhazovacími kolíky a odvzdušnění dutiny formy pomocí odvzdušňovacích drážek. Součástí této práce je také návrh zvoleného plastového dílu, kterým je plastová svorka na uzavíraní kuchyňských sáčku. Úvod praktické části se věnuje také návrhu designu svorky a jejímu konstrukčnímu návrhu. Svorka je navržena v krátkém a dlouhém provedení.
This master's thesis deals with the design of a family injection mould with a hot runner system. In the initial part of the mould design, a preliminary design of the injection mould parts is created and then then a detailed design of the components and systems of the injection mould is presented. The geometry and orifice size of the hot runner system is designed using Cadmould simulation software to achieve uniform filling of both cavities. The tempering system is also designed using the simulation software, ensuring uniform heat dissipation from the mould cavity surface. Furthermore, a mechanical ejection system with ejector pins and venting of the mould cavity with venting grooves is designed. This work also includes the design of the chosen plastic part, which is a plastic clamp for sealing kitchen bags. The introduction of the practical part deals with the design of the clamp and its structural design. The clamp is designed in a short and a long version.
This master's thesis deals with the design of a family injection mould with a hot runner system. In the initial part of the mould design, a preliminary design of the injection mould parts is created and then then a detailed design of the components and systems of the injection mould is presented. The geometry and orifice size of the hot runner system is designed using Cadmould simulation software to achieve uniform filling of both cavities. The tempering system is also designed using the simulation software, ensuring uniform heat dissipation from the mould cavity surface. Furthermore, a mechanical ejection system with ejector pins and venting of the mould cavity with venting grooves is designed. This work also includes the design of the chosen plastic part, which is a plastic clamp for sealing kitchen bags. The introduction of the practical part deals with the design of the clamp and its structural design. The clamp is designed in a short and a long version.
Description
Subject(s)
vstřikovací forma, vstřikování, konstrukce forem, simulace, plastový díl