Příprava dílů pro PIV měření
Loading...
Date
2022-11-01
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Bakalářská práce je zaměřena na přípravu fluorescenčních dílů pro PIV měření za účelem
snížit množství rozptýleného světla a odrazů. První část obsahuje popis metody PIV, druhá
popis optických jevů na rozhraní. V třetí části je provedena rešerše metod pro snížení
množství rozptýleného a odraženého světla při PIV měření.
Tyto poznatky jsou aplikovány při návrhu fluorescenčních dílů. Pro výrobu vzorků byly
zvoleny dvě metody: odlévání z epoxidové pryskyřice a 3D SLA tisk. Jako aditivum
byl použit Rhodamin 6G. U vzorků byla měřena energie laserového paprsku prošlého
skrz a intenzita odraženého světla. V praktické části je rovněž popsáno uspořádání
experimentu a jsou tam blíže popsána použita zařízení. Závěrem je vyhodnocení naměřených
dat.
The bachelor's thesis is focused on preparation of fluorescent parts for PIV measurement in order to reduce light scattering and reflection. In the first part there is a description of basic principles of PIV. The second part contains a description of the optical phenomena at the interface. The third part consists of an overview of methods for reducing the amount of scattered and reflected light in PIV measurements. These findings are applied to the design fluorescent parts. There are two methods chosen for manufacture of the samples: epoxy resin casting and 3D SLA printing. As an additive was used Rhodamine 6G. For the samples, the energy of the laser beam passed through,and the intensity of the reflected light were measured. In the practical section there are also described the experimental setup and details of the used equipment. At the end the work contains of an evaluation of the measured data.
The bachelor's thesis is focused on preparation of fluorescent parts for PIV measurement in order to reduce light scattering and reflection. In the first part there is a description of basic principles of PIV. The second part contains a description of the optical phenomena at the interface. The third part consists of an overview of methods for reducing the amount of scattered and reflected light in PIV measurements. These findings are applied to the design fluorescent parts. There are two methods chosen for manufacture of the samples: epoxy resin casting and 3D SLA printing. As an additive was used Rhodamine 6G. For the samples, the energy of the laser beam passed through,and the intensity of the reflected light were measured. In the practical section there are also described the experimental setup and details of the used equipment. At the end the work contains of an evaluation of the measured data.
Description
Subject(s)
PIV, fluorescence, fluorescenční model, rhodamin 6G, optické měření