Electrospun Polyamide-6 Nanofiber Hybrid Membranes for Wastewater Treatment

dc.contributor.authorYalcinkaya, Fatma
dc.contributor.authorYalcinkaya, Baturalp
dc.contributor.authorHrůza, Jakub
dc.date.accessioned2019-08-30T07:21:56Z
dc.date.available2019-08-30T07:21:56Z
dc.date.issued2019-01-01
dc.description.abstractElectrospun nanofiber hybrid membranes have superior membrane performance due to their high specific surface area, narrow pore size, high porosity, and uniform pore size. Recently, increasing attention has been given to hydrophilic membranes such as polyamide 6 (PA6) in applications microfiltration and reverse osmosis. Electrospun PA6 nanofiber hybrid membranes have not found any real application due to their poor mechanical strength under high pressure. In this study, PA6 nanofiber layer was prepared using wire electrospinning method. Three supporting material with different adhesion method has been used to improve the mechanical properties of the membranes. Membranes were characterized with Scanning Electron Microscope images, pore size, and contact angle measurements. Tensile strength and the delamination tests were run to measure the mechanical properties of the membranes. Three types of wastewater were carried out during filtration; using real wastewater supplied from a company which consists of pitch and tar oils, engine oil/water mixture and kitchen oil/water mixture. Results indicated that the adhesion method and the supporting layer played a big role in the permeability of the membranes. The PA6 nanofiber hybrid membranes exhibited high water fluxes in even at low pressures which indicate that electrospun nanofiber membranes might be highly promising for microfiltration applications.cs
dc.format.extent7 strancs
dc.identifier.WebofScienceResearcherIDA-2141-2014 Yalcinkaya, Fatma
dc.identifier.WebofScienceResearcherID
dc.identifier.doi10.1007/s12221-019-8820-4
dc.identifier.orcid0000-0002-5057-3718 Yalcinkaya, Fatma
dc.identifier.urihttps://dspace.tul.cz/handle/15240/153349
dc.identifier.urihttps://link.springer.com/article/10.1007%2Fs12221-019-8820-4
dc.language.isocscs
dc.relation.ispartofFIBERS AND POLYMERS
dc.subjectWastewatercs
dc.subjectNanofibercs
dc.subjectMembrane selectivitycs
dc.subjectMicrofiltercs
dc.subjectPolyamidecs
dc.titleElectrospun Polyamide-6 Nanofiber Hybrid Membranes for Wastewater Treatmentcs
local.citation.epage99
local.citation.spage93
local.identifier.publikace6272
local.relation.issue1
local.relation.volume20
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Electrospun Polyamide-6 Nanofiber Hybrid Membranes for.pdf
Size:
1.4 MB
Format:
Adobe Portable Document Format
Description:
článek
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Collections