Vliv teploty vytvrzování na mechanické vlastnosti slitiny AlMgSi
dc.contributor | Hisem Pavel, Ing. Ph.D. : 65637 | |
dc.contributor.advisor | Solfronk Pavel, doc. Ing. Ph.D. : 55399 | |
dc.contributor.author | Than Van, Truyen | |
dc.contributor.other | Kolnerová Michaela, Ing. Ph.D. Konzultant : 55408 | |
dc.date.accessioned | 2019-05-21T16:58:11Z | |
dc.date.available | 2019-05-21T16:58:11Z | |
dc.date.committed | 2019-1-27 | |
dc.date.defense | 2018-8-28 | |
dc.date.submitted | 2017-10-27 | |
dc.date.updated | 2018-12-10 | |
dc.degree.level | Bc. | |
dc.description.abstract | Bakalářská práce se zabývá vlivem teploty vytvrzování na mechanické vlastnostislitiny AlMgSi (AW 6082). Obecně jsou slitiny hliníku hned po slitinách železanejpoužívanějšími konstrukčními materiály dneška. Hliníkové slitiny jsou všeobecně velmi často využívány jako konstrukční materiál. Hlavním důvodem je především jejich měrná hmotnost, dostupnost, dobré mechanické vlastnosti a odolnost vůči korozi.Práce je rozdělena na teoretickou a praktickou část. V teoretické části jsou popsány vlastnosti hliníku a jeho slitin, je zde podán přehled slitin hliníku rozdělených na vytvrditelné a nevytvrditelné a je zde také popsána fyzikálně-metalurgická podstata vytvrzování. Nechybí zde ani nejdůležitější technické informace o zkoumané slitině hliníku AW 6082.Cílem experimentální části bylo nalezení vhodných teplot pro hliníkové slitinyAlMgSi (AW-6082) a následné zjištění vlivu teploty vytvrzování na mechanické vlastnosti slitin AlMgSi (AW-6082). | cs |
dc.description.abstract | The bachelor thesis deals with the influence of hardening temperature on themechanical properties of alloy AlMgSi (AW 6082). Generally, aluminum alloys are the most commonly used structural materials after iron alloys right now. Aluminum alloys are generally very often used as a construction material. The main reason is mainly their specific weight, availability, good mechanical properties and corrosion resistance.The thesis is divided into the theoretical and practical part. The theoretical part describes the properties of aluminum and its alloys. Moreover, there is given an overview of aluminum alloys classification into heat treatable and non-heat treatable and physical nature of age hardening as well. There are also mentioned the most important technical information about the tested aluminum alloy AW 6082.The aim of the experimental part was to find a suitable temperatures for aluminum alloys AlMgSi (AW-6082) and then to determine the effect of hardening temperature on the mechanical properties of AlMgSi alloys (AW-6082). | en |
dc.description.mark | ||
dc.format | 58 s.(10 938 znacků). | |
dc.format.extent | Grafy 1 ROM | |
dc.identifier.signature | V 201900453 | |
dc.identifier.uri | https://dspace.tul.cz/handle/15240/152392 | |
dc.language.iso | cs | |
dc.relation.isbasedon | [1] POLMEAR, I. Ligth Alloy - From traditional Alloys to Nanocrystals. 4th ed. Oxford: Butterworth-Heinemann, 2006. s. 421. ISBN 0-7506-6371-5. | |
dc.relation.isbasedon | [2] PTÁČEK, L. et al. Nauka o materiálu I. 2. opr. arozš. vyd. Brno: Akademickénakladatelství CERM, 2003. s. 516. ISBN 80-7204-283-1. | |
dc.relation.isbasedon | [3] PTÁČEK, L. et al. Nauka o materiálu II. Brno: Akademickénakladatelství CERM, 1999. s. 350. ISBN 80-7204-130-4. | |
dc.relation.isbasedon | [4] ASM HANDBOOK. Volume 8 - Mechanical Testing and Evaluation. 10th ed. Materials Park: ASM International, 2000. s. 998. ISBN 0-87170-389-0. | |
dc.relation.isbasedon | [5] PőHLANDT, K. Materials Testing for the Metal Forming Industry. Berlin: Springer-Verlag, 1989. s. 226. ISBN 3-540-50651-9. | |
dc.relation.isbasedon | [6] ASM HANDBOOK. Volume 14 - Forming and Forging. 6th ed. Materials Park: ASM International, 2004. s. 978. ISBN 0-87170-020-4. | |
dc.rights | Vysokoškolská závěrečná práce je autorské dílo chráněné dle zákona č. 121/2000 Sb., autorský zákon, ve znění pozdějších předpisů. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou https://knihovna.tul.cz/document/26 | cs |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act. https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics https://knihovna.tul.cz/document/26 | en |
dc.rights.uri | https://knihovna.tul.cz/document/26 | |
dc.rights.uri | https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf | |
dc.subject | Měření tvrdosti | cs |
dc.subject | slitina AW 6082 | cs |
dc.subject | vytvrzování | cs |
dc.subject | stárnutí | cs |
dc.subject | mechanické vlastnosti | cs |
dc.subject | Hardness Measurement | en |
dc.subject | AW 6082 Alloy | en |
dc.subject | Hardening | en |
dc.subject | Ageing | en |
dc.subject | Mechanical Properties | en |
dc.subject.verbis | hliník | cs |
dc.subject.verbis | tvrdost | cs |
dc.subject.verbis | aluminium alloys | en |
dc.subject.verbis | mechanical properties of materials | en |
dc.subject.verbis | aluminium | en |
dc.subject.verbis | hardness | en |
dc.subject.verbis | slitiny hliníku | cs |
dc.subject.verbis | mechanické vlastnosti materiálů | cs |
dc.title | Vliv teploty vytvrzování na mechanické vlastnosti slitiny AlMgSi | cs |
dc.type | bakalářská práce | cs |
local.degree.abbreviation | Bakalářský | |
local.degree.discipline | SI | |
local.degree.programme | Strojní inženýrství | |
local.degree.programmeabbreviation | B2301 | |
local.department.abbreviation | KSP | |
local.faculty | Fakulta strojní | cs |
local.faculty.abbreviation | FS | |
local.identifier.author | S17000310 | |
local.identifier.stag | 37618 | |
local.identifier.verbis | kpw06580951 | |
local.note.administrators | automat | |
local.poradovecislo | 453 | |
local.verbis.aktualizace | 2019-10-05 07:26:58 | cs |
local.verbis.studijniprogram | KSP Strojní inženýrství/Strojní inženýrství | cs |
Files
Original bundle
1 - 4 of 4
Loading...
- Name:
- BP_THAN_VAN_TRUYEN.pdf
- Size:
- 2.76 MB
- Format:
- Adobe Portable Document Format
- Description:
- VSKP
Loading...
- Name:
- Than_Van_Truyen_1.pdf
- Size:
- 535.26 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_vedouciho_VSKP
Loading...
- Name:
- Than_Van_Truyen_2.pdf
- Size:
- 63.68 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_oponenta_VSKP
Loading...
- Name:
- ProtokolSPrubehemObhajobySTAG.pdf
- Size:
- 13.67 KB
- Format:
- Adobe Portable Document Format
- Description:
- Prubeh_obhajoby_VSKP