Vliv orientace dílů zhotovených technologií SLS na mechanické vlastnosti polyamidu 12
Loading...
Date
2025-06-17
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Bakalářská práce se zabývá analýzou vlivu orientace dílů z PA 12, vyrobených aditivní technologií SLS, na jejich pevnostní a rázové vlastnosti. Experimentální výzkum je zaměřen na hodnocení různých orientací zkušebních těles v rámci tiskového prostoru, a to ve směrech základních os (X, Y, Z), v diagonálních směrech mezi těmito osami a také při natočení zkušebních těles o 45° a 90° kolem jejich hlavní podélné osy. Nejlepších pevnostních a rázových vlastností bylo dosahováno u zkušebních těles orientovaných v rovině XY, přičemž křížová skenovací strategie výplně potlačila anizotropii vlastností v této rovině. Při diagonální orientaci zkušebních těles mezi rovinou XY a osou Z docházelo k zhoršení sledovaných vlastností a při orientaci ve směru osy Z byly zaznamenané vlastnosti zpravidla nejhorší. Vliv natočení zkušebních těles v rámci jejich orientace nepříznivě ovlivňoval především chování těles při ohybovém namáhání.
The bachelor thesis analyzes the influence of part orientation on the mechanical and impact properties of PA 12 components manufactured using SLS additive technology. The experimental research focuses on evaluating various orientations of test specimens within the build chamber - specifically along the reference axes (X, Y, Z), diagonally between these axes, and also with specimens rotated by 45° and 90° around their main longitudinal axis. The highest strength and impact resistance were observed in specimens oriented in the XY plane, where the cross-scanning infill strategy helped to reduce anisotropy of these properties. A decline in monitored properties was observed in diagonal orientations between the XY plane and the Z-axis, with the poorest properties typically associated with vertical (Z-axis) orientation. Rotating the specimens within their set orientation had a particularly negative effect on their behavior under bending loads.
The bachelor thesis analyzes the influence of part orientation on the mechanical and impact properties of PA 12 components manufactured using SLS additive technology. The experimental research focuses on evaluating various orientations of test specimens within the build chamber - specifically along the reference axes (X, Y, Z), diagonally between these axes, and also with specimens rotated by 45° and 90° around their main longitudinal axis. The highest strength and impact resistance were observed in specimens oriented in the XY plane, where the cross-scanning infill strategy helped to reduce anisotropy of these properties. A decline in monitored properties was observed in diagonal orientations between the XY plane and the Z-axis, with the poorest properties typically associated with vertical (Z-axis) orientation. Rotating the specimens within their set orientation had a particularly negative effect on their behavior under bending loads.
Description
Subject(s)
3D tisk, aditivní výroba, technologie SLS, polyamid 12, mechanické vlastnosti