Stanovení vlivu teploty na deformační odpor
dc.contributor | Luňáček Martin, Ing. Ph.D. : 66122 | |
dc.contributor.advisor | Solfronk Pavel, doc. Ing. Ph.D. : 55399 | |
dc.contributor.author | Čeřovský, Radek | |
dc.contributor.other | Kolnerová Michaela, Ing. Ph.D. Konzultant : 55408 | |
dc.date.accessioned | 2019-04-08T14:18:29Z | |
dc.date.available | 2019-04-08T14:18:29Z | |
dc.date.committed | 2019-2-1 | |
dc.date.defense | 2018-8-28 | |
dc.date.submitted | 2017-11-1 | |
dc.date.updated | 2018-12-10 | |
dc.degree.level | Bc. | |
dc.description.abstract | Tato bakalářská práce se zabývá vlivem teploty na deformační odpor u oceli S460NL a hliníkové slitiny AW-5754. Rozdílnost v základních vlastnostech těchto materiálů je jistě známá. Avšak deformační odpor je méně známá veličina, ale její význam v technické praxi je podstatný. Informace o této veličině lišící se pro různé materiály se využívá v rozsáhlé technologii tváření, především pak u tváření za tepla.Práce je rozdělena na teoretickou a experimentální část. V teoretické části je popsána technologie kování, ve které se deformační odpor vyskytuje, strukturní teorie ocelí a hliníkových slitin a v závěru je shrnuta zkouška tahem, kterou se hledaná veličina deformačního odporu zjišťuje.Experimentální část se zabývá přiblížením materiálových vlastností měřených materiálů, popisem průběhu měření, strojů a pomocných zařízení, které byly při měření použity. Závěrem práce je grafické zhodnocení naměřených hodnot. | cs |
dc.description.abstract | This Bachelor thesis deals with the influence of temperature on the deformation resistance of S460NL steel and aluminium alloy AW-5754. Differences in the basic properties of these materials are certainly known. However, deformation resistance is a lesser-known quantity, but it is importance in technical practice is essential. Information about this variable varies for different materials is used extensively in forming technology, especially for hot forming.The thesis is divided into the theoretical and experimental part. The theoretical part describes the technology of forging in which the deformation resistance occurs, the structural theory of steels and aluminium alloys, and further, the tensile test, in which the sought quantity of deformation resistance is determined, is summarize dat the end.The experimental part deals with the approximation of the material properties of measured materials, the description of the measurements course, the machines and the auxiliary devices used during the measurements. The conclusion of the work is a graphical evaluation of the measured values. | en |
dc.description.mark | ||
dc.format | 61 | |
dc.format.extent | 1 ROM | |
dc.identifier.signature | V 201900357 | |
dc.identifier.uri | https://dspace.tul.cz/handle/15240/152027 | |
dc.language.iso | cs | |
dc.relation.isbasedon | [1] ASM HANDBOOK. Volume 14 - Forming and Forging. 6th ed. Materials Park: ASM International, 2004. s. 978. ISBN 0-87170-020-4. | |
dc.relation.isbasedon | [2] ASM HANDBOOK. Volume 8 - Mechanical Testing and Evaluation. 10th ed. Materials Park: ASM International, 2000. s. 998. ISBN 0-87170-389-0. | |
dc.relation.isbasedon | [3] HOSFORD, W.F., CADDEL, R. Metal Forming (Mechanics and Metallurgy). 3rd ed. New York: Cambridge University Press, 2007. s. 312. ISBN 978-0-521-88151-0. | |
dc.relation.isbasedon | [4] PTÁČEK, L. et al. Nauka o materiálu I. 2. opr. a rozš. vyd. Brno: Akademickénakladatelství CERM, 2003. s. 516. ISBN 80-7204-283-1. | |
dc.relation.isbasedon | [5] POLMEAR, I. Ligth Alloy - From traditional Alloys to Nanocrystals. 4th ed. Oxford: Butterworth-Heinemann, 2006. s. 421. ISBN 0-7506-6371-5. | |
dc.relation.isbasedon | [6] TSCHAETSCH, H. Metal Forming Practise (Processes Machines Tools). Berlin: Springer-Verlag, 2006. s. 405. ISBN-10: 3-540-33216-2. | |
dc.relation.isbasedon | [7] MICHNA, Š., NOVÁ, I. Technologie a zpracování kovových materiálů. Prešov: Adin, 2008. s. 326. ISBN 978-80-89244-38-6. | |
dc.relation.isbasedon | [8] MICHNA Š. a kol. Encyklopedie hliníku. Prešov: Adin s.r.o., 2005. 700 s. ISBN: 80-89041-88-4. | |
dc.relation.isbasedon | [9] ČSN EN ISO 6892-1. Kovové materiály - Zkoušení tahem - Část 1: Zkušební metoda za pokojové teploty. Praha: Úřad pro technickou normalizaci, metrologii a státní zkušebnictví, 2011. 64 s. Třídící znak 420310. | |
dc.rights | Vysokoškolská závěrečná práce je autorské dílo chráněné dle zákona č. 121/2000 Sb., autorský zákon, ve znění pozdějších předpisů. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou https://knihovna.tul.cz/document/26 | cs |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act. https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics https://knihovna.tul.cz/document/26 | en |
dc.rights.uri | https://knihovna.tul.cz/document/26 | |
dc.rights.uri | https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf | |
dc.subject | ocel S460NL | cs |
dc.subject | slitina AW-5754 | cs |
dc.subject | kování | cs |
dc.subject | deformační odpor | cs |
dc.subject | teplota | cs |
dc.subject | Gleeble 3500 | cs |
dc.subject | steel S460NL | en |
dc.subject | alloy AW-5754 | en |
dc.subject | forging | en |
dc.subject | deformation resistance | en |
dc.subject | temperature | en |
dc.subject | Gleeble 3500 | en |
dc.subject.verbis | tváření za tepla | cs |
dc.subject.verbis | hot working | en |
dc.subject.verbis | cold working | en |
dc.subject.verbis | tváření kovů | cs |
dc.subject.verbis | tváření za studena | cs |
dc.subject.verbis | metal forming | en |
dc.title | Stanovení vlivu teploty na deformační odpor | cs |
dc.type | bakalářská práce | cs |
local.degree.abbreviation | Bakalářský | |
local.degree.discipline | SI | |
local.degree.programme | Strojní inženýrství | |
local.degree.programmeabbreviation | B2301 | |
local.department.abbreviation | KSP | |
local.faculty | Fakulta strojní | cs |
local.faculty.abbreviation | FS | |
local.identifier.author | S15000042 | |
local.identifier.stag | 37763 | |
local.identifier.verbis | kpw06570634 | |
local.note.administrators | automat | |
local.poradovecislo | 357 | |
local.verbis.aktualizace | 2019-10-05 07:21:46 | cs |
local.verbis.studijniprogram | KSP Strojní inženýrství/Strojní inženýrství | cs |
Files
Original bundle
1 - 4 of 4
Loading...
- Name:
- BP_Cerovsky_2018.pdf
- Size:
- 3.16 MB
- Format:
- Adobe Portable Document Format
- Description:
- VSKP
Loading...
- Name:
- Cerovsky_1.pdf
- Size:
- 537.53 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_vedouciho_VSKP
Loading...
- Name:
- Cerovsky_2.pdf
- Size:
- 81.05 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_oponenta_VSKP
Loading...
- Name:
- ProtokolSPrubehemObhajobySTAG.pdf
- Size:
- 15.26 KB
- Format:
- Adobe Portable Document Format
- Description:
- Prubeh_obhajoby_VSKP