Vliv teploty při výrobě optických ploch
dc.contributor | Matoušek Ondřej, Ing. : 63877 | |
dc.contributor.advisor | Dančová Petra, doc. Ing. Ph.D. : 57854 | |
dc.contributor.author | Kuryshev, Vladislav | |
dc.contributor.other | Vít Tomáš, prof. Ing. Ph.D. Konzultant : 55449 | |
dc.date.accessioned | 2019-10-14T09:50:54Z | |
dc.date.available | 2019-10-14T09:50:54Z | |
dc.date.committed | 2019-8-1 | |
dc.date.defense | 2019-05-30 | |
dc.date.submitted | 2018-2-1 | |
dc.date.updated | 2019-5-30 | |
dc.degree.level | Ing. | |
dc.description.abstract | Tato diplomová práce je zaměřená na zkoumání vlivu teploty při výrobě optických ploch. V této práci je popsána technologie výroby čoček, jsou uvedeny principy měření optických povrchů. Je proveden experiment zaměřený na experimentální určení teplotního namáhaní při tmelení čočky. Je zkoumán vliv různých typů tmelek na změnu tvaru povrchu čočky při tepelném namáhání. Měření zkoumaných optických povrchů je provedeno na Fizeau interferometru. Pro porovnání výsledků z experimentů je provedena numerická simulace v softwaru MSC.Marc/Mentat. | cs |
dc.description.abstract | This thesis is based on the research of temperature influence on the optical surfaces manufacture. The technology of manufacturing lenses is described, and the measurement principles of optical surfaces are also presented in this work. The experiment is aimed at the experimental determination of the thermal stress during lens cementing. The influence of different types of holders on the change in the shape of the lens surface under thermal stress is investigated. Measurement of the optical surfaces is performed on a Fizeau interferometer. To compare the results of experiments numerical simulation software MSC.Marc/Mentat was used. | en |
dc.description.mark | ||
dc.format | 65 s. (68 869 znaků) | |
dc.format.extent | Ilustrace, Grafy nejsou | |
dc.identifier.signature | V 201901388 | |
dc.identifier.uri | https://dspace.tul.cz/handle/15240/153935 | |
dc.language.iso | cs | |
dc.relation.isbasedon | matsymblbrack1matsymbrbrack ASKIN, Ronald G. a Charles R. STANDRIDGE. Modeling and analysis of manufacturing systems. New York: Wiley, 1993. ISBN 9780471514183. | |
dc.relation.isbasedon | vsp5mm matsymblbrack2matsymbrbrack MALACARA, Daniel, ed. Handbook of optical engineering. Second edition. Boca Raton: Taylor & Francis, CRC Press, 2018. Optical science and engineering. ISBN 9781498720793. | |
dc.relation.isbasedon | vsp5mm matsymblbrack3matsymbrbrack DRIGGERS, Ronald G., ed., Encyclopedia of optical engineering. New York: Dekker, 2003. ISBN 9780824709402. | |
dc.rights | Vysokoškolská závěrečná práce je autorské dílo chráněné dle zákona č. 121/2000 Sb., autorský zákon, ve znění pozdějších předpisů. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou https://knihovna.tul.cz/document/26 | cs |
dc.rights | A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act. https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics https://knihovna.tul.cz/document/26 | en |
dc.rights.uri | https://knihovna.tul.cz/document/26 | |
dc.rights.uri | https://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf | |
dc.subject | optická výroba | cs |
dc.subject | tmelení čoček | cs |
dc.subject | deformace | cs |
dc.subject | teplotní namáhání | cs |
dc.subject | Fizeau interferometr | cs |
dc.subject | numerická simulace | cs |
dc.subject | optical manufacturing | en |
dc.subject | cementing lenses | en |
dc.subject | deformation | en |
dc.subject | thermal stress | en |
dc.subject | Fizeau interferometer | en |
dc.subject | numerical simulation | en |
dc.title | Vliv teploty při výrobě optických ploch | cs |
dc.title | The Influence of Temperature on the Manufactory of Optical Surfaces | en |
dc.type | diplomová práce | cs |
local.degree.abbreviation | Navazující | |
local.degree.discipline | EZ2 | |
local.degree.programme | Strojní inženýrství | |
local.degree.programmeabbreviation | N2301 | |
local.department.abbreviation | KEZ | |
local.faculty | Fakulta strojní | cs |
local.faculty.abbreviation | FS | |
local.identifier.author | S16000326 | |
local.identifier.stag | 37925 | |
local.identifier.verbis | kpw06584623 | |
local.note.administrators | automat | |
local.poradovecislo | 1388 |
Files
Original bundle
1 - 4 of 4
Loading...
- Name:
- DP_Kuryshev.pdf
- Size:
- 5.62 MB
- Format:
- Adobe Portable Document Format
- Description:
- VSKP
Loading...
- Name:
- Posudek_DP_Kuryshev_Matousek.pdf
- Size:
- 439.46 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_oponenta_VSKP
Loading...
- Name:
- Posudek_DP_Kuryshev_Dancova.pdf
- Size:
- 118.23 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek_vedouciho_VSKP
Loading...
- Name:
- ProtokolSPrubehemObhajobySTAG.pdf
- Size:
- 13.94 KB
- Format:
- Adobe Portable Document Format
- Description:
- Prubeh_obhajoby_VSKP