Flexural Behavior of Carbon Textile-Reinforced Geopolymer Composite Thin Plate

Simple item page
dc.contributor.authorLe Chi, Hiep
dc.contributor.authorLouda, Petr
dc.contributor.authorPeriyasamy, Aravin Prince
dc.contributor.authorBakalova, Totka
dc.contributor.authorKovačič, Vladimír
dc.date.accessioned2019-07-25T07:36:40Z
dc.date.available2019-07-25T07:36:40Z
dc.date.issued2019-11-08
dc.description.abstractTextile-reinforced Portland cement-based concrete has been researched and developed over the last few decades. It was widely used in a different range of applications, such as repair and/or strengthening of structural elements, thin walls, lightweight structures, façade elements, and others. Due to its varied application, this study aims to develop the carbon textile-reinforced geopolymer composite. Specimens of rectangular form with the dimensions of 400 × 100 × 15 mm3 , reinforced with carbon textile, were produced. Four-point bending test was used to evaluate the effect of carbon textile on the mechanical strength of reinforced geopolymer composite based on the three factors: the different mortar compositions corresponding to the addition of the chopped basalt fiber (BF), the number of carbon textile layers, and the different thicknesses of the mortar cover layer. Besides that, a small part of the pull-out test was also considered to assess the adhesion strength at the interface between carbon textile and geopolymer mortar. The experimental results from the four-point bending test showed that the mechanical strength of composite specimens increased when the content of the chopped basalt fiber increased. With the increasing number of the textile layers, the specimens improved the flexural strength significantly. However, the flexural toughness of the specimens reinforced with three textile layers did not improve, as compared to those reinforced with two textile layers. The experimental results for the specimens related to the mortar cover thicknesses indicated that specimens with the mortar cover thickness of 2 mm provide the best strength. The experimental results from the pull-out tests showed that all the specimens have the same failure mode by slipping of the fiber yarn from the matrix.cs
dc.format.extent14 strancs
dc.identifier.doi10.3390/fib6040087
dc.identifier.urihttps://dspace.tul.cz/handle/15240/152956
dc.identifier.urihttps://www.mdpi.com/2079-6439/6/4/87
dc.language.isocscs
dc.publisherMDPI
dc.relation.ispartofFibers
dc.subjectgeopolymercs
dc.subjectpull-outcs
dc.subjectcompressive strengthcs
dc.subjectflexural strengthcs
dc.subjectcarbon textilecs
dc.subjectchopped basalt fibercs
dc.subjecttextile-reinforced geopolymer matrixcs
dc.titleFlexural Behavior of Carbon Textile-Reinforced Geopolymer Composite Thin Platecs
local.relation.issue4
local.relation.volume6
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Flexural Behavior of Carbon Textile-Reinforced Geopolymer Composite Thin Plate.pdf
Size:
4.17 MB
Format:
Adobe Portable Document Format
Description:
článek
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections