Analýza poškození povlaku Zn-Mg při ohybovém namáhání
Loading...
Date
2025-06-18
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Bakalářská práce se zabývá analýzou vlivu deformace na hlubokotažný plech s nově vyvíjejícím se ochranným povlakem Zn-Mg. V teoretické části je popsáno, co jsou ochranné povlaky, jejich rozdělení a funkce, dále vědní obor tribologie, tření a koroze materiálu. Experimentální část se zaměřuje na testování hlubokotažných ocelových pásků s ochranným povlakem Zn-Mg, na kterých byly aplikovány čtyři velikosti deformace pomocí protahování pásků přes váleček s následujícími průměry - 5 mm, 6 mm, 8 mm a 10 mm. Pásky s těmito jednotlivými deformacemi byly následně podrobeny statické zkoušce tahem, kde se naměřené hodnoty základních mechanických charakteristik - smluvní mez kluzu, mez pevnosti v tahu, homogenní tažnost a celková tažnost, porovnávaly se základním nedeformovaným vzorkem. Dále byl tento deformovaný povrch (ochranný povlak) testovaných vzorků analyzován pomocí moderního elektronového mikroskopu Helios 5 PFIB CXe, který byl schopný xenonovým plazmatem lokálně odprášit materiál a analyzovat tak trhliny v povlaku. Díky tomuto zařízení bylo zjištěno, že k trhlinám dochází při všech aplikovaných deformacích, a to jak na vnitřní, tak vnější straně. Z chemického hlediska se tyto trhliny primárně šíří eutektikem Zn-Mg.
The bachelor thesis deals with the analysis of the effect of deformation on a deep-drawing sheet a newly developing Zn-Mg protective coating. The theoretical part describes what protective coatings are, their distribution and function, as well as the science of tribology, friction and corrosion of the material. The experimental part focuses on the testing of deep-drawing sheets with Zn-Mg protective coating on which four magnitudes of deformation were applied by drawing the strips over a roller with the following diameters - 5 mm, 6 mm, 8 mm and 10 mm. The testing strips with these particular deformations were then subjected to the static tensile testing where the measured values of the basic mechanical characteristics - proof yield strength, ultimate tensile strength, homogeneous and total ductility - were compared with the undeformed specimen. Furthermore, these deformed surfaces (protective coating) of the test specimens were analysed using a modern Helios 5 PFIB CXe electron microscope, which was capable of locally dusting the material with xenon plasma to analyse the cracks in the coating. Thanks to this equipment, it was found that cracks are occurring at all applied deformations, both on the inside and on the outside part. Chemically, these cracks are primarily propagated through the Zn-Mg eutectic composition.
The bachelor thesis deals with the analysis of the effect of deformation on a deep-drawing sheet a newly developing Zn-Mg protective coating. The theoretical part describes what protective coatings are, their distribution and function, as well as the science of tribology, friction and corrosion of the material. The experimental part focuses on the testing of deep-drawing sheets with Zn-Mg protective coating on which four magnitudes of deformation were applied by drawing the strips over a roller with the following diameters - 5 mm, 6 mm, 8 mm and 10 mm. The testing strips with these particular deformations were then subjected to the static tensile testing where the measured values of the basic mechanical characteristics - proof yield strength, ultimate tensile strength, homogeneous and total ductility - were compared with the undeformed specimen. Furthermore, these deformed surfaces (protective coating) of the test specimens were analysed using a modern Helios 5 PFIB CXe electron microscope, which was capable of locally dusting the material with xenon plasma to analyse the cracks in the coating. Thanks to this equipment, it was found that cracks are occurring at all applied deformations, both on the inside and on the outside part. Chemically, these cracks are primarily propagated through the Zn-Mg eutectic composition.
Description
Subject(s)
Ochranné povlaky, Zn-Mg, tribologie, statická zkouška tahem, elektronový mikroskop, deformace