Konstrukce formy pro výrobu zkušebních těles technologie ultrazvukového svařování
Loading...
Date
2021-06-22
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Diplomová práce se zabývá návrhem vstřikovací formy na výrobu zkušebního tělesa pro ultrazvukové svařování, které je popsáno pokynem DVS-2216-3. Konstrukční návrh byl navržen s ohledem na požadavky výroby zkušebních těles, u kterých je zejména vyžadováno co nejmenší ovlivnění vlastností vstřikovaného materiálu, zajištění homogenních materiálových vlastností v celém objemu vstřikovaného dílu a možnost zpracovávat více druhů termoplastů. Na základě těchto požadavků byla věnována zvláštní pozornost vtokovému systému a systému chlazení. Navržená forma byla vyrobena a funkčně odzkoušena na vstřikovacím stroji ARBURG ALLROUNDER 320 C.
The thesis deals with the design of an injection mold for a test specimen production for ultrasonic welding technology which is described by instruction DVS-2216-3. The engineering design was designed with regard to the requirements of the production of test specimens which in require particular the least possible influence on the properties of the injected material, assurance homogeneous material properties throughout the volume of the injected part and the ability to process more types of thermoplastics. Based on these requirements, special attention was paid to the runner and the cooling system. The designed mold was manufactured and functionally tested on an ARBURG ALLROUNDER 320 C injection molding machine.
The thesis deals with the design of an injection mold for a test specimen production for ultrasonic welding technology which is described by instruction DVS-2216-3. The engineering design was designed with regard to the requirements of the production of test specimens which in require particular the least possible influence on the properties of the injected material, assurance homogeneous material properties throughout the volume of the injected part and the ability to process more types of thermoplastics. Based on these requirements, special attention was paid to the runner and the cooling system. The designed mold was manufactured and functionally tested on an ARBURG ALLROUNDER 320 C injection molding machine.
Description
Subject(s)
konstrukce vstřikovací formy, zkušební tělesa, ultrazvukové svařování termoplastů, injection mold design, test specimens, ultrasonic welding of thermoplastics