Analýza silových a deformačních účinků lepidla v procesu vytvrzování
Loading...
Date
2025-06-17
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Tato bakalářská práce se zabývá analýzou silových a deformačních účinků lepidla v procesu jeho vytvrzování. V teoretické části jsou shrnuty principy technologie lepení, druhy namáhání lepených spojů, rozdělení lepidel a jejich využití, zejména v automobilovém průmyslu. Důraz je kladen na faktory ovlivňující kvalitu spoje a způsoby testování, jak nedestruktivní, tak destruktivní. Experimentální část se zaměřuje na měření sil a deformací vznikajících při vytvrzování nadouvacího lepidla "SikaSeal-832". Byla provedena měření při různých vzdálenostech mezi čelistmi (5, 10, 15 a 20 mm), a to jak při nulovém zatížení, tak při pevně zafixované vzdálenosti. Výsledky ukázaly, že vzdálenost mezi lepenými plochami má zásadní vliv na chování lepidla. Výsledky této práce mohou přispět k lepšímu pochopení mechanických vlastností lepených spojů a jejich chování během procesu vytvrzování, což může být užitečné jak pro další výzkum, tak pro praktické využití v průmyslové praxi, obzvlášť v automobilovém průmyslu.
This bachelor thesis deals with the analysis of the force and deformation effects of adhesive during the curing process. The theoretical part summarizes the principles of adhesive bonding, types of stress in bonded joints, adhesive classification, and their use, especially in the automotive industry. Attention is also given to factors influencing bond quality and to both non-destructive and destructive testing methods. The experimental part focuses on measuring the forces and deformations occurring during the curing of the expanding adhesive "SikaSeal-832". Measurements were carried out at different distances between jaws (5, 10, 15, and 20 mm), both under zero load and at fixed spacing. The results showed that the gap between bonded surfaces has a significant impact on the adhesive's behavior. The findings of this thesis may contribute to a better understanding of the mechanical properties of bonded joints and their behavior during curing, which can be useful for further research as well as practical applications in industrial practice, particularly in the automotive industry.
This bachelor thesis deals with the analysis of the force and deformation effects of adhesive during the curing process. The theoretical part summarizes the principles of adhesive bonding, types of stress in bonded joints, adhesive classification, and their use, especially in the automotive industry. Attention is also given to factors influencing bond quality and to both non-destructive and destructive testing methods. The experimental part focuses on measuring the forces and deformations occurring during the curing of the expanding adhesive "SikaSeal-832". Measurements were carried out at different distances between jaws (5, 10, 15, and 20 mm), both under zero load and at fixed spacing. The results showed that the gap between bonded surfaces has a significant impact on the adhesive's behavior. The findings of this thesis may contribute to a better understanding of the mechanical properties of bonded joints and their behavior during curing, which can be useful for further research as well as practical applications in industrial practice, particularly in the automotive industry.
Description
Subject(s)
Lepidlo, lepené spoje, vytvrzování lepidel, mechanické vlastnosti lepidel, statické zkoušky, dynamické zkoušky, adheze, koheze, automobilový průmysl, experimentální měření, nedestruktivní zkoušky, destruktivní zkoušky.