Study of Surface Morphology, Structure, Mechanical And Tribological Properties of an Alsin Coating Obtained by the Cathodic Arc Deposition Method
dc.contributor.author | Bakalova Totka | cs |
dc.contributor.author | Louda Petr | cs |
dc.contributor.author | Kejzlar Pavel | cs |
dc.contributor.author | Petkov Nikolay | cs |
dc.contributor.author | Cholakova Tetiana | cs |
dc.contributor.author | Bahchedzhiev Hristo | cs |
dc.contributor.author | Ryšánek Petr | cs |
dc.contributor.author | Kormunda Martin | cs |
dc.contributor.author | Čapková Pavla | cs |
dc.date.accessioned | 2018-09-25T12:10:54Z | |
dc.date.available | 2018-09-25T12:10:54Z | |
dc.date.issued | 2017 | cs |
dc.description.abstract | AlSiN coatings were prepared by the cathodic arc deposition method at a temperature of 400 °C and pressure of 2.6 Pa. The chemical composition, determined by SEM/EDS analysis, shows that the AlSiN coating presented here has a stoichiometry structure (Al40Si9N51). XPS and XRD analyses indicated AlN in both cubic and hexagonal modifications in the coating, and that the coating has a not fully completed nanocomposite structure. Nanoindentation measurements indicate nanohardness and elastic modulus of 39 GPa and 389 GPa, respectively. The coating has a very good adhesion strength with an average critical load of 28.3N (first cohesive failure) and 62.3N (first adhesion failure). The estimated wear rate and coefficient of friction of the coating are 27.2 × 10−6 mm3 N−1 m−1 and 0.7, respectively (using the friction pair AlSiN/Al2O3). | |
dc.format.extent | 12 | cs |
dc.identifier.doi | 10.1016/j.spmi.2017.05.022 | |
dc.identifier.issn | 0749-6036 | cs |
dc.identifier.orcid | 0000-0003-2617-0473 Bakalova Totka | |
dc.identifier.orcid | 0000-0002-0426-2943 Louda Petr | |
dc.identifier.uri | https://dspace.tul.cz/handle/15240/30728 | |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S074960361730890X | |
dc.language.iso | eng | cs |
dc.publisher | Elsevier BV | cs |
dc.publisher.city | Amsterdam | cs |
dc.relation.ispartofseries | 0 | cs |
dc.relation.uri | http://www.sciencedirect.com/science/article/pii/S074960361730890X | cs |
dc.subject | Study of Surface Morphology | cs |
dc.subject | Structure | cs |
dc.subject | Mechanical and Tribological Properties | cs |
dc.title | Study of Surface Morphology, Structure, Mechanical And Tribological Properties of an Alsin Coating Obtained by the Cathodic Arc Deposition Method | cs |
local.citation.epage | 402-413 | cs |
local.citation.spage | 402-413 | cs |
local.identifier.publikace | 4178 | |
local.identifier.wok | 411541600047 | en |
local.relation.issue | September | cs |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Study of surface.pdf
- Size:
- 4.18 MB
- Format:
- Adobe Portable Document Format
- Description:
- článek