Studie pevnostních charakteristik vstřikovaných vzorků se studenými spoji
Loading...
Date
2025-06-17
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Bakalářská práce se zaměřuje na porovnání vlastností vzorků z polypropylenu bez
studených spojů se vzorky se studenými spoji. V teoretické části je popsaná
problematika vad vstřikovaných dílů s konkrétním zaměřením na studené spoje a jejich charakteristiku, vznik, a nakonec i možnost eliminace. V experimentální části byla pro účely porovnávání vzorků navrhnuta a poté i vyrobena tvarová deska s otočnými vložkami, na které lze simulovat výrobu vzorků se studenými spoji, ale i bez studených spojů a díky imbus klíči lze vložkami flexibilně otáčet. Dále je již práce zaměřená na praktické měření hodnot ze zkoušek tahem, ohybem a rázové houževnatosti, kde vždy pro zvolenou šarži materiálů byly vyhodnoceny a porovnávány hodnoty u vzorků se studenými spoji a bez studených spojů. V neposlední řadě proběhla analýza studených spojů za pomoci CT, kde bylo možné vidět vzorky s vnitřní vadou a bez vnitřní vady. Tento výzkum přispívá k bližšímu porovnání hodnot vzorků z polypropylenu bez vlákenného plniva, vzorků s krátkými vlákny a vzorků s dlouhými vlákny, kde tyto
materiály jsou hojně užívány v automobilovém průmyslu.
This bachelor thesis focuses on the comparison of polypropylene samples without weld lines to samples with weld lines. The theoretical section addresses the issue of defects in injection-molded parts, with a specific focus on weld lines, their characteristics, formation mechanisms, and potential methods of elimination. For the purposes of experimental comparison, a mold plate with rotatable inserts was designed and manufactured. This tool allows for the simulation of both samples with and without weld lines, and the inserts can be easily rotated using an Allen key. The practical part of the thesis is dedicated to the evaluation of mechanical properties obtained through tensile, flexural, and impact toughness testing. For each selected material batch, test results were assessed and compared between samples with weld lines and those without. Lastly, a computed tomography (CT) analysis of the weld lines was conducted, enabling the identification of internal defects in the samples.This research contributes to a more detailed comparison of the properties of unfilled polypropylene samples, samples reinforced with short glass fibers, and samples reinforced with long glass fibers, which are materials widely used in the automotive industry.
This bachelor thesis focuses on the comparison of polypropylene samples without weld lines to samples with weld lines. The theoretical section addresses the issue of defects in injection-molded parts, with a specific focus on weld lines, their characteristics, formation mechanisms, and potential methods of elimination. For the purposes of experimental comparison, a mold plate with rotatable inserts was designed and manufactured. This tool allows for the simulation of both samples with and without weld lines, and the inserts can be easily rotated using an Allen key. The practical part of the thesis is dedicated to the evaluation of mechanical properties obtained through tensile, flexural, and impact toughness testing. For each selected material batch, test results were assessed and compared between samples with weld lines and those without. Lastly, a computed tomography (CT) analysis of the weld lines was conducted, enabling the identification of internal defects in the samples.This research contributes to a more detailed comparison of the properties of unfilled polypropylene samples, samples reinforced with short glass fibers, and samples reinforced with long glass fibers, which are materials widely used in the automotive industry.
Description
Subject(s)
Studený spoj, polypropylen, tvarová deska s otočnými vložkami, vstřikování plastů, tahová pevnost polypropylenu, ohybová pevnost polypropylenu, rázová houževnatost polypropylenu, CT