Browsing by Author "Arumugam, Veerakumar"
Now showing 1 - 5 of 5
Results Per Page
Sort Options
- ItemIn-plane shear behavior of 3D spacer knitted fabrics(SAGE Publications Ltd, 2016) Arumugam, Veerakumar; Mishra, Rajesh; Militký, Jiří; Tunák, MarošThe shear behavior of 3D spacer knitted fabrics was investigated by using a picture frame fixture. Three different methods were used to find the shear angle during loading rate of 10 mm/min. All the tests were recorded by a CCD monochrome camera. The images acquired during loading process were used for analysis in order to obtain the full-field displacement and shear angles at chosen points on the surface of test specimen. An experimental and analytical investigation of picture frame shear fixture was conducted to determine its suitability for measuring intra-ply shear properties of 3D knitted spacer fabrics. In this work, a fixture was designed to analyze the in-plane shear behavior of these fabrics. The nonlinear behavior of shear force versus shear angle and the deformation mechanism were analyzed. The curves for shear force versus shear angle and position of buckling for in-plane shear test are recorded by considering two different frame lengths in order to compare with each other. Load–displacement curves of intra-ply shear tests are also analyzed. In addition to this, a program was developed in MATLAB using Hough transform to analyze the shear angle in the real-time image taken during displacement of specimen at various positions. The results of image analysis were compared with the actual experimental results. These findings are important requirements for further improvements in designing of picture frame fixture and to study the in-plane shear properties of 3D fabrics. © 2015, © The Author(s) 2015.
- ItemInvestigation on thermo-physiological and compression characteristics of weft-knitted 3D spacer fabrics(Taylor and Francis Ltd., 2016) Arumugam, Veerakumar; Mishra, Rajesh; Militký, Jiří; Salačová, JanaThe thermo-physiological comfort and compression properties of knitted spacer fabrics have been evaluated by varying the different spacer fabric parameters. Air permeability and water vapor transmission of the fabrics were measured using the Textest FX-3300 air permeability tester and PERMETEST. Thermal behavior of fabrics was evaluated by (TCi) thermal conductivity analyzer and overall moisture management capacity was evaluated by moisture management tester. Spacer fabrics compression properties were also tested using KES-FB3. In the KES testing, the compression resilience, work of compression, linearity of compression, and other parameters were calculated from the pressure–thickness curves. Analysis of variance was performed using new statistical software named QC expert trylobite and Darwin in order to compare the influence of different fabric parameters on thermo-physiological and compression behavior of samples. This study established that the raw materials, type of spacer yarn, density, thickness, and tightness of surface layer have significant influence on both thermal conductivity and work of compression in spacer fabrics. The parameter which mainly influences the water vapor permeability of these fabrics is the property of raw material i.e. the wetting and wicking properties of fibers. The Pearson correlation between moisture capacity of the fabrics and water vapor permeability was found. © 2016 The Textile Institute
- ItemNoise attenuation performance of warp knitted spacer fabrics(SAGE PUBLICATIONS LTD, 1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2019-02) Arumugam, Veerakumar; Mishra, Rajesh; Militký, Jíří; Tomková, BlankaThe development of functional textile structures is important to improve noise attenuation of human life in automotives, residential and occupational environments. In this research, an attempt has been made to find the suitability of three-dimensional (3D) knitted spacer fabrics for sound absorption. Hence, an experimental and analytical investigation on the sound absorption behavior of warp knitted spacer fabrics was conducted. Due to their porous nature, interconnected pores, bulkier and 3D structure, the spacer fabrics have the ability to attenuate more sound energy than conventional materials. This research examined the acoustic properties of spacer fabrics in relation to material parameters such as thickness, density and surface structure and structural characteristics such as massivity, porosity, tortuosity and air flow resistivity. The sound absorption coefficient of the test samples was measured using the impedance tube method by ASTM E-1050 in the frequency range of 50-6400 Hz. The results showed that the acoustic insulation of spacer fabric improves with their thickness and massivity, reduction in their porosity, tortuous path and high air flow resistance. Advance statistical evaluation and two-way analysis of variance is used to analyze the significance of the combined effect of various factors on air flow resistivity and the noise reduction coefficient. These findings are important requirements for the design of spacer fabrics for noise control in the automobile upholstery, buildings, auditoriums, etc.
- ItemPletené distanční textilie pro multifunkční aplikace(Technická Univerzita v Liberci, ) Arumugam, Veerakumar;Cílem této práce bylo prověřit multifunkční vlastnosti osnov a útků 3D distančních pletených textilií, které by mohly být použity jako náhrada existujících vycpávkových materiálů v matracích, polštářích, vložkách do bot, autosedačkách a podpěrách zad. To představuje experimentální a analytické šetření vlastností na vnitřních vrstvách 3D distančních textilií smykem prováděných pomocí upnutí ve fixačním rámečku (The Picture-frame shear test). Bylo analyzováno nelineární chování smykového napětí oproti úhlu smyku a deformačnímu mechanismu. Křivky smykového napětí vůči úhlu smyku a pozici vzpěry pro zkoušku smyku v rovině jsou zaznamenány pro dvé různé délky rámu pro účely dalšího porovnávání s ostatními. Jsou analyzovány zátěžové-posunuté křivky smykového testu ve vnitřních vrstvách. Kromě toho byl v prostředí MATLAB vytvořen program s využitím Houghovy transformace pro analýzu snímání obrazu smykového úhlu v reálném čase při posunutí vzorku v různých polohách. Výsledky obrazové analýzy byly porovnány se skutečnými experimentálními výsledky. Rovněž i smykové napětí bylo predikováno s použitím modelu konečných prvků a porovnáno s experimentálními výsledky. Tato práce se také zabývá určením vlivu různých strukturních charakteristik pletených distančních textilií na chování tlaku a absorpční schopnosti energie. Potenciál tlakového mechanismu textilie byl identifikován s podporou kompresní křivky napětí/deformace, práce a účinnosti při různých stupních komprese. Třetí stupeň polynomické regrese byl použit pro stanovení vlastností pružné deformace k získání výsledků komprese. Distanční textilie mají vynikající tepelné a akustické vlastnosti ve srovnání s konvenčními tkanými či pletenými strukturami, pěnami nebo netkanými textiliemi oproti jejich nádherné 3D struktuře sendviče a porézní povaze. Proto tato práce rovněž zkoumá vliv různých strukturních parametrů distančních pletenin,jako jsou plošná hustota, porozita, tloušťka, hustota očekatd. na termo-fyziologické a akustické vlastnosti. Absorpční koeficient zvuku (SAC) byl hodnocen pomocí dvou mikrofonové impedanční trubice. Kromě toho, křivolakost textilie byla vypočítána analyticky a porovnána s experimentálními výsledky. Tato práce také popisuje vliv materiálových parametrů a strukturních charakteristik na akustické vlastnosti 3D distančních textilií. Pokročilé statistické vyhodnocení a dvoufaktorová analýza rozptylu jsou použity k analýze významu různých faktorů, jako je tloušťka, typ distanční nitě, povrchové struktury a surovin, na specifické vlastnosti.Tyto poznatky jsou důležitými požadavky pro navrhování pletených distančních textilií, které by mohly být použity jako vhodný fixační materiál v aplikacích pro automobilový průmysl, matrace, sedačky, vložky do bot, polštáře, podpěry zad atd.
- ItemThermal - Acoustic Performance of 3D Spacer Fabrics and Their Possible Correlation(TEXTILE BIOENGINEERING & INFORMATICS SOCIETY LTD, TBIS 2010 SECRETARIAT MN104, HONG KONG POLYTECHNIC UNIV, HONG KONG SAR, 0000, PEOPLES R CHINA, 2018) Arumugam, Veerakumar; Mishra, Rajesh; Křemenáková, Dana; Tomková, Blanka; Militký, JiříSpacer fabrics is an unconventional three-dimensional textile material that has become a major focus for researchers due to their multifunctional application. It has two outer layers connected with monofilament or multifilament spacer yarn which keeps the fabric bulky with low density and high breathability. Due to its porous nature, interconnected pores, bulk and 3D structure, spacer fabrics have the ability to attenuate more sound energy than other conventional materials. The use of 3-Dimensional (3D) porous textile materials by the civil and mechanical engineers for improved thermo-acoustic environment have also widened the research scope. This research paper presents an experimental investigation on the sound absorption behaviour and thermal properties of warp knitted spacer fabrics. The Sound absorption coefficient (SAC) and thermal conductivity (K) were measured using two microphone impedance tube and Alambeta. Moreover, tortuosity of the spacer fabrics was also measured using ultrasonic transducers. This study discusses in depth the influence of material parameters and characteristics on acoustic properties of 3D spacer knitted fabrics. The results show that the fabric surface property, porosity, flow resistivity and tortuosity have significant effects on the sound absorbability as well as thermal conductivity. Finally, the paper describes regression equations and correlation between Noise reduction coefficient (NRC) and Thermal conductivity (K) for knitted spacer fabrics. The equation is useful to determine the NRC value with the K-value and vice versa which can be used to design the material for various applications.