PUBLIKACE 1990 - 1999

DSpace Repository

PUBLIKACE 1990 - 1999

 

Collections in this community

Recent Submissions

  • Nguyen, Anh Vu (1993)
    The sliding interaction between a particle and a bubble in flotation is discussed in the context of induction time, the important measure of flotation behavior, and is modeled to calculate the sliding time. This permits ...
  • Mitura, Ewa; Mitura, StanisŁaw; Niedzielski, Piotr; Haś, Zdzislaw; Wołowiec, Remigiusz; Jakubowski, Andrzej; Szmidt, Jan; Sokołowska, Aleksandra; Louda, Petr; Marciniak, Jan; Koczy, B. (1994)
    The results of experimental studies on amorphous diamond carbon layers obtained by a new method of r.f. dense plasma chemical vapour deposition onto orthopaedic pins and screws are presented. Research on this subject which ...
  • Brzezina, Miroslav (Akademie Verlag Gmbh, 1994)
    For the Kolmogorov operator L =: partial derivative(2)/partial derivative x(2) + x partial derivative/partial derivative y - partial derivative/partial derivative t we describe all transformations mapping solutions of the ...
  • Meloun, Milan; Militký, Jiří (Springer-Verlag, 1994)
    Nonlinear regression program DCMINOPT is introduced for numerical analysis of a set of {A, pH} data expressing a dependence of absorbance of a mixture of variously protonated light-absorbing species L, LH,..., LHR on pH. ...
  • Meloun, Milan; Javůrek, Milan; Militký, Jiří (Springer-Verlag Wien, 1992)
    Nonlinear regression program DHMINOPT has been used for an analysis of a set of values expressing the dependence of mixed dissociation constant on ionic strength according to the extended Debye-Hueckel law. Efficiency of ...
  • Jirsák, Oldřich; Lukáš, David; Charvát, Richard (Textile Inst Intl Headquarters, 1993)
    A two-dimensional model of the mechanical properties of textiles is constructed, and the relations between model parameters and model behaviour are studied. The influence of the number of bonding sites in the model on ...
  • Meloun, Milan; Militký, Jiří (1994)
    Response quantities of analytical chemistry investigations of, for instance, concentration or content of substances, viscosity, stability constants or solubility, can be obtained as a non-linear transformation of directly ...
  • Militký, Jiří; Šesták, Jaroslav (Elsevier Science Bv, 1992)
    Main features of building non-isothermal kinetic models are discussed. The possibilities of evaluation of kinetic and temperature terms are described. Statistical methods for parameter estimation under more realistic ...
  • Odvárka, Jaroslav; Prášil, Miroslav; Schejbalová, Hana (1991)
    Dyeing behaviour of new forms of disperse dyes containing various types of polymer dispersants based on polyacrylic acid was studied. The high dispersion stability at various temperatures up to 130 degreesC for the dyeing ...
  • Kovář, Radko (1993)
    Methods of producing face float stitches in weft knitting are discussed: loop transfer, inlay, and purl knitting. The types of fabric which can be created using face float stitches are briefly described. The inlay method, ...
  • Ursíny, Petr; Safar, V.; Mägel, Matthias (1995)
    Studies relating to the production of rotor open-end-spun cotton yarns indicate that a performance increase in rotor spinning technology and the production of finer yarns place stringent demands on feed sliver quality and ...
  • Hes, Luboš; Staněk, Jaroslav; Smekal, J. (1991)
    A theoretical model concerning the thermal conductivity of thin needled fabrics for interlinings for protective thermal-insulating garments is described. Heat transfer due to conduction and radiation is included, but ...
  • Hes, Luboš (1992)
    The thermal properties of raised blankets made from polyacrylonitrile fibres or wool and polyacylonitrile mixtures are found to be generally better than those of 100% wool blankets produced by tufting. The main advantage ...
  • Militký, Jiří; Meloun, Milan (Elsevier Science Bv, 1993)
    Estimation of nonlinear regression quality leads to examination of quality of parameter estimates, a degree of fit, a prediction ability of model proposed and quality of experimental data. Statistical analysis serves for ...
  • Ursíny, Petr; Mägel, Matthias (1994)
    A description is given of the machine - a carding machine with stationary flats and a very potential for levelling long-term and short-term irregularities - is discussed in relation to rotor open-end spinning. The satisfactory ...
  • Ursíny, Petr; Mägel, Matthias (1995)
    An increase in rotor open-end spinning machine capacity and measures for a higher yarn spinning limit are always measured against the machine efficiency which is significantly affected by yarn breakages and their elimination. ...
  • Militký, Jiří; Kovačič, Vladimír; Kvíčala, Jaroslav (The Textile Institute, Manchester, UK, 1997)
    Basalt fibers similarly as a glass fibers are used for production of high ttemperature resistant and chemically inactive products. Basalt is used mainly for molded productss (flag stones, pipes) with increased abrasion ...
  • Militký, Jiří; Bajzík, Vladimír (1997)
    Describes an experiment designed to investigate the influence of washing/ironing cycles and softening after sanforization on the hand grade, shrinkage and surface roughness of three selected cotton weaves for men's shirts. ...
  • Kovačič, Vladimír; Militký, Jiří (1996)
    In this article selected properties of basalt fibres in comparison with glass fibres are presented. The properties were investigated after tempering to 50, 100, 200, 300 degrees C. The breaking strength, deformation to ...
  • Militký, Jiří; Kovačič, Vladimír (1996)
    This paper presents the results of an experimental analysis of the breaking strength distribution of basalt filaments. It outlines the composition and basic physical characteristics of glass and basalt fibres, and provides ...

View more