Effect of the T8/5 cooling time on the properties of s960mc steel in the HAZ of welded joints evaluated by thermal physical simulation

DSpace Repository

Show simple item record

dc.contributor.author Mičian, Miloš
dc.contributor.author Harmaniak, Daniel
dc.contributor.author Nový, František
dc.contributor.author Winczek, Jerzy
dc.contributor.author Moravec, Jaromír
dc.contributor.author Trško, Libor
dc.date.accessioned 2020-02-25T07:55:45Z
dc.date.available 2020-02-25T07:55:45Z
dc.date.issued 2020-02-25
dc.identifier.uri https://dspace.tul.cz/handle/15240/154438
dc.identifier.uri https://www.mdpi.com/2075-4701/10/2/229
dc.description.abstract The heat input into the material during welding significantly affects the properties of high-strength steels in the near-weld zone. A zone of hardness decrease forms, which is called the soft zone. The width of the soft zone also depends on the cooling time t8/5. An investigation of the influence of welding parameters on the resulting properties of welded joints can be performed by thermal physical simulation. In this study, the effect of the cooling rate on the mechanical properties of the heat-affected zone of the steel S960MC with a thickness of 3 mm was investigated. Thermal physical simulation was performed on a Gleeble 3500. Three levels of cooling time were used, which were determined from the reference temperature cycle obtained by metal active gas welding (MAG). A tensile test, hardness measurement, impact test with fracture surface evaluation, and microstructural evaluation were performed to investigate the modified specimen thickness. The shortest time t8/5 = 7 s did not provide tensile and yield strength at the minimum required value. The absorbed energy after recalculation to the standard sample size of 10 × 10 mm was above the 27 J limit at −40 °C. The hardness profile also depended on the cooling rate and always had a softening zone. cs
dc.format.extent 18 stran cs
dc.language.iso cs cs
dc.publisher MDPI
dc.relation.ispartof Metals
dc.subject Heat-affected zone (HAZ) cs
dc.subject Mechanical properties cs
dc.subject Physical simulation cs
dc.subject S960MC steel cs
dc.subject T8/5 cooling time cs
dc.title Effect of the T8/5 cooling time on the properties of s960mc steel in the HAZ of welded joints evaluated by thermal physical simulation cs
dc.identifier.doi 10.3390/met10020229
local.relation.volume 10
local.relation.issue 2
local.access open access
dc.identifier.orcid 0000-0003-4731-5969 Moravec, Jaromír
local.article.number 229

Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace

Advanced Search


My Account