Publikace 2020

DSpace Repository

Publikace 2020

 

Recent Submissions

  • Truxová, Veronika; Šafka, Jiří; Seidl, Martin; Kovalenko, Iaroslav; Voleský, Lukáš; Ackermann, Michal (MM SCIENCE, PRIPOCNI 1519-10A, PRAGUE 10, 10100, CZECH REPUBLIC, 2020-06)
    Complex ceramic parts tend to be difficult or even impossible to produce by conventional methods. Therefore, the 3D printing technologies have started to spread widely in the area of ceramic parts production. The aim of ...
  • Srb, Pavel; Petrů, Michal (MM SCIENCE, PRIPOCNI 1519-10A, PRAGUE 10, 10100, CZECH REPUBLIC, 2020-06)
    Reduction of energy consumption, improving performance and efficiency is one of the most important factors influencing current trends in the development of components used in the transportation and automotive industry. For ...
  • Jírová, Radka; Pešík, Lubomír (MM SCIENCE, PRIPOCNI 1519-10A, PRAGUE 10, 10100, CZECH REPUBLIC, 2020-06)
    Linear rolling guides are used for realizing a translational motion of mechanical elements or assemblies e.g. in industrial robots, handling or CNC machines. Their reliability is highly desirable to meet the requirements ...
  • Širá, Elena; Vavrek, Roman; Kravčáková Vozárová, Ivana; Kotulič, Rastislav (MDPI, 2020-05)
    In today's turbulent world influenced by globalization, knowledge is becoming a key factor in the market. Every economy, if it wants to be successful and competitive, must pay more attention to knowledge and its creation, ...
  • Starý, Michal; Novotný, František; Horák, Marcel; Stará, Marie (Elsevier B.V., 2020)
    Nuclear power plants, as one of the cornerstones of today's global and, most importantly, European energy sector, place considerably high demands on all stages from design and construction, through operation and control, ...
  • Heidarrezaei, Mahshid; Shokravi, Hoofar; Huyop, Fahrul; Koloor, Seyed Saeid Rahimian; Petrů, Michal (MDPI, 2020-07-02)
    Halogenated compounds are an important class of environmental pollutants that are widely used in industrial chemicals such as solvents, herbicides, and pesticides. Many studies have been carried out to explore the ...
  • Běhálek, Luboš; Borůvka, Martin; Brdlík, Pavel; Habr, Jiří; Lenfeld, Petr; Kroisová, Dora; Veselka, Filip; Novák, Jan (SPRINGER, VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS, 2020-06)
    Bioplastics reinforced by agricultural waste fibres show promise to provide degradation back into the environment when they are no longer needed. These biocomposites have the potential to replace synthetic polymers from ...
  • Ambriško, Ĺubomír; Pešek, Ladislav (EDP SCIENCES S A, 17, AVE DU HOGGAR, PA COURTABOEUF, BP 112, F-91944 LES ULIS CEDEX A, FRANCE, 2020-06-01)
    The purpose of the present paper is the diagnostic method of the steady state tearing tests in thin steel sheets. The camera-based contactless system was used in the experimental research. The MATLAB software was used for ...
  • Yang, Tao; Xiong, Xiaoman; Petrů, Michal; Tan, Xiaodong; Kaneko, Hiroki; Militký, Jiří; Sakuma, Atsushi (MDPI, 2020-06-26)
    Polyester nonwoven fibrous material is widely used in construction and automobile industries for thermal insulation purposes. It is worthy and meaningful to understand the effect of structural parameters on the thermal ...
  • Novák, Miroslav; Ferková, Želmíra (SPRINGER, ONE NEW YORK PLAZA, SUITE 4600, NEW YORK, NY, UNITED STATES, 2020-06)
    The magnetization of rare earth ring magnets forming the rotor of a BLDC or a synchronous motor requires a high level of magnetization field to achieve the desired magnetization pattern. The design of the magnetizing yoke ...
  • Mitáš, Josef; Frömel, Karel; Valach, Petr; Suchomel, Aleš; Vorlíček, Michal; Groffik, Dorota (MDPI, 2020-06-25)
    (1) Background: The increasing socio-economic and educational demands on adolescents should be reflected in their lifestyles accordingly. The aim of the study was therefore to identify the trends in the achievement of ...
  • Švermová, Pavla; Černík, Miroslav (MDPI, 2020-06-24)
    The chemical industry is a particularly sensitive sector that very often works with toxic, harmful and dangerous substances. This paper offers insight into the corporate socially responsible (CSR) behaviour of a specific ...
  • Delfi, Masoud; Ghomi, Matineh; Zarrabi, Ali; Mohammadinejad, Reza; Baghban, Taraghdari Zahra; Ashrafizadeh, Milad; Nazarzadeh Zare, Ehsan; Agarwal, Tarun; Padil, Vinod V. T.; Mokhtari, Babak; Rossi, Filippo; Perale, Giuseppe; Sillanpaa, Mika; Borzacchiello, Assunta; Maiti, Tapas Kumar; Makvandi, Pooyan (MDPI, 2020-06-23)
    The use of polymers and nanomaterials has vastly grown for industrial and biomedical sectors during last years. Before any designation or selection of polymers and their nanocomposites, it is vital to recognize the targeted ...
  • Novák, Ondřej; Rozkovec, Martin; Plíva, Jan (ELSEVIER, RADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2020-07)
    Test patterns are usually transferred from the tester to the circuit under test in a compressed form as it minimizes test access mechanism bandwidth and transfer time. It was found that nonlinear binary codes could be used ...
  • Tunáková, Veronika; Tunák, Maroš; Bajzík, Vladimír; Ocheretna, Larysa; Arabuli, Svitlana; Kyzymchuk, Olena; Vlasenko, Viktoriia (SAGE PUBLICATIONS LTD, 1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2020-05)
    Today we can't imagine our life without electricity and technology, transport and television. In the information age, computers, the Internet, cell phones, and smartphones are helpers for everyday needs. However, our ...
  • Shokravi, Hoofar; Shokravi, Hooman; Heidarrezaei , Mahshid; Koloor, Seyed Saeid Rahimian; Petrů, Michal (MDPI, 2020-06-19)
    Bridges are designed to withstand different types of loads, including dead, live, environmental, and occasional loads during their service period. Moving vehicles are the main source of the applied live load on bridges. ...
  • Raabová, Hedvika; Háková, Martina; Chocholoušová Havlíková, Lucie; Erben, Jakub; Chvojka, Jiří; Solich, Petr; Švec, František; Šatínský, Dalibor (AMER CHEMICAL SOC, 1155 16TH ST, NW, WASHINGTON, DC 20036 USA, 2020-05-19)
    Poly-epsilon-caprolactone nanofibrous polymer has been used as an alternative to restricted access media for extraction of protein-containing biological samples and direct transfer in the chromatographic system. Three ...
  • Venkataraman, Mohanapriya; Yang, Kai; Xiong, Xiaoman; Militký, Jiří; Křemenáková, Dana; Zhu, Guocheng; Yao, Juming; Wang, Yan; Zhang, Guoqing (MDPI, 2020-06-15)
    Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer known for its excellent hydrophobic properties. In this work, samples from PTFE dispersions with different combinations of water and carbon microparticles were ...
  • Rydzkowski, Tomasz; Reszka, Kazimierz; Szczypinski, Mieczyslaw; Szczypinski, Michal Marek; Kopczynska, Elibieta; Thakur, Vijay Kumar (WILEY-HINDAWI, ADAM HOUSE, 3RD FL, 1 FITZROY SQ, LONDON, WIT 5HE, ENGLAND, 2020-04-25)
    The aim of the present study is to examine the effect of the addition of carbon nanoparticles (sigma sp(2) hybridization) on the mechanical properties of foamed polystyrene. In this work, we focus on the study of the impact ...
  • Nejad, Ali Farokhi; Alipour, Roozbeh; Rad, Mozafar Shokri; Yahya, Mohd Yazid; Koloor, Seyed Saeid Rahimian; Petrů, Michal (MDPI, 2020-06-09)
    Polyurethane foams are one of the most common auxetic structures regarding energy absorption enhancement. This present study evaluates the result reliability of two different numerical approaches, the H-method and the ...

View more