Fakulta textilní

DSpace Repository

Fakulta textilní

 

Recent Submissions

  • Textilana (Textilana, 2. polovin)
  • Textilana (Textilana, 194?)
  • Textilana (Textilana, 1849-1853)
  • Shaker, Khubab; Jabbar, Abdul; Karahan, Mehmet; Karahan, Nevin; Nawab, Yasir (Textile Composite Materials Research Group, Faculty of Engineering and Technology, National Textile University, Faisalabad, Pakistan; Department of Material Engineering, Technical University of Liberec, Liberec, Czech Republic; Uludag University Vocational, School of Technical Sciences, Gorukle, Bursa, TurkeySAGE Publications LtdenJ Compos Mater, 2017-02-15)
    In this paper, high strain rate compression properties of aramid and ultrahigh molecular weight polyethylene composites in the out-of-plane direction are tested at room temperature on a Split Hopkinson Pressure Bar apparatus. ...
  • Jevšnik, Simona; Eryürük, Selin Hanife; Kalaoğlu, Fatma; Kayaoğlu, Burçak Karagüzel; Komárková, Petra; Golombikova, Věra; Stjepanovič, Zoran (Textile Technologies and Design Faculty, Istanbul Technical University, Istanbul, Turkey; Faculty of Textile Engineering, Department of Clothing Technology, Technical University of Liberec, Liberec, Czech Republic; Faculty of Mechanical Engineering, University of Maribor, Maribor, SloveniaSAGE Publications LtdenJ. Ind. Text., 2017-02-15)
    This study examined the effects of ultrasonic welding parameters on bond strength, seam thickness and seam stiffness, as well as water permeability. For study purpose, two types of four-layered fabrics with same compositions ...
  • Maqsood, Hafiz Shahzad; Bashir, Uzma; Zubair, Muhammad; Wiener, Jakub; Militký, Jiří (2017-01-04)
    In this work, composites were made by improved bonding of the cationized cellulosic fabric and some anionic matrix like Carboxymethyl Cellulose (CMC). Mercerized cotton fabric was cationized using cationization agent, ...
  • Rwawiire, Samson; Tomková, Blanka; Militký, Jiří; Hes, Luboš; Kale, Bandu Madhukar; Jabbar, Abdul (2017-01-04)
    The desire to mitigate climate change due to greenhouse gas emissions has led to the exploration of plant fibers as alternative materials for various industrial applications acoustics inclusive. In this investigation, sound ...
  • Zubair, Muhammad; Eldeeb, Moaz; Neckář, Bohuslav (2017-01-04)
    Despite the development of artificial neural network and computer simulation models that predict yarn tensile properties, the mathematical model is still very important being the base for all models. In this research, three ...
  • Zubair, Muhammad; Neckář, Bohuslav; Eldeeb, Moaz; Baig, Gulzar A. (2017-01-04)
    In this paper, specific stress–strain curves were predicted for viscose, cotton, and polyester yarns spun by ring and rotor technologies. The average fiber-specific stress–strain curves were used to predict yarn-specific ...
  • Techniková, Lenka; Tunák, Maroš (2017-01-04)
    This paper compares the efficiency of two different methods for a 3D fabric surface reconstruction with defects. The efficiency of the methods is evaluated according to the accuracy of 3D reconstruction, especially the ...
  • Lenfeldová, Irena; Hes, Luboš; Annayeva, Mahri (2017-01-04)
    Achievement of a good level of thermal comfort of under-suits for dry suit diving which enable also the required mobility of the diver in water is inevitable not only for the scuba sport and commercial diving people but ...
  • Zubair, Muhammad; Maqsood, Hawsood Shahzad; Neckář, Bohuslav (2017-01-04)
    Work wear woven fabrics have wide application in the area of sports, industrial textiles and defense. The performance characteristics of these fabrics are important with respect to their specific application. To improve ...
  • Rwawiire, Samson; Tomková, Blanka; Wiener, Jakub; Militký, Jiří; Kasedde, Allan; Kale, Bandu Madhukar; Jabbar, Abdul (2017-01-04)
    There is a global surge in the application of natural fiber reinforced polymer composites in various industries. Polymer reinforced composites are faced with dimensional instability during their service life, the reason ...
  • Arumugam, Veerakumar; Mishra, Rajesh; Militký, Jiří; Tunák, Maroš (SAGE Publications LtdTechnical university of Liberec, Czech RepublicTechnická Univerzita v Liberci, 2016)
    The shear behavior of 3D spacer knitted fabrics was investigated by using a picture frame fixture. Three different methods were used to find the shear angle during loading rate of 10 mm/min. All the tests were recorded by ...
  • Moučková, Eva; Eldeeb, Moaaz (Taylor and Francis Ltd.Technická univerzita v LiberciTechnical university of Liberec, Czech Republic, 2016-09-08)
    This paper presents a three-dimensional numerical simulation of the airflow field inside Rieter air jet spinning nozzle. The velocity and pressure distribution were analyzed to describe the principle of yarn formation. The ...
  • Arumugam, Veerakumar; Mishra, Rajesh; Militký, Jiří; Salačová, Jana (Taylor and Francis Ltd.Technical University of Liberec, 2016)
    The thermo-physiological comfort and compression properties of knitted spacer fabrics have been evaluated by varying the different spacer fabric parameters. Air permeability and water vapor transmission of the fabrics were ...
  • Jirsák, Oldřich; Lukáš, David; Charvát, Richard (Textile Inst Intl Headquarters, 1993)
    A two-dimensional model of the mechanical properties of textiles is constructed, and the relations between model parameters and model behaviour are studied. The influence of the number of bonding sites in the model on ...
  • Militký, Jiří; Šesták, Jaroslav (Elsevier Science Bv, 1992)
    Main features of building non-isothermal kinetic models are discussed. The possibilities of evaluation of kinetic and temperature terms are described. Statistical methods for parameter estimation under more realistic ...
  • Odvárka, Jaroslav; Prášil, Miroslav; Schejbalová, Hana (1991)
    Dyeing behaviour of new forms of disperse dyes containing various types of polymer dispersants based on polyacrylic acid was studied. The high dispersion stability at various temperatures up to 130 degreesC for the dyeing ...
  • Kovář, Radko (1993)
    Methods of producing face float stitches in weft knitting are discussed: loop transfer, inlay, and purl knitting. The types of fabric which can be created using face float stitches are briefly described. The inlay method, ...

View more